AD7466BRM-REEL

• Product introduction

AD7466BRM-REEL     1.6 V微功耗10位ADC AD7466/AD7467/AD7468分别是12/10/8位高速、低功耗、逐次逼近型模数converter（ADC），工作电压为1.6V至3.6V单电源，具有低功耗特性，最高呑吐量可达200 kSPS。这些器件均内置一个低噪声、宽带宽采样-保持放大器，可处理3 MHz以上的输入频率。

The conversion process and the data acquisition process pass.CSand the serial clock to create the conditions for the device to interface with a microprocessor or DSP. The input signal is in.CS的下降沿进行采样，而转换同时在此处启动。该器件无流水线延迟。

The reference voltage is from V_DD This provides the ADC with the widest dynamic input range and, therefore, its analog input range is 0 to V_DD 。 The slew rate depends on the SCLK.

Product Focus

1. Rated supply voltage: 1.6 V to 3.6 V
2. 12、10和8位ADC，采用SOT-23和MSOP两种封装
3. High throughput, low power consumption, maximum power consumption of 0.9 mW in normal operation at 100 kSPS at 3 V
4. 灵活的功耗/串行时钟速度管理。转换速率取决于串行时钟，通过提高串行时钟速度可缩短转换时间。可在转换完成后自动进入省电模式，从而降低了省电模式下的平均功耗，器件的最大功耗为0.1 µA，省电模式下一般为8 nA
5. The reference voltage is derived from the power supply
6. No pipeline delay
7. 该器件具有一个标准逐次逼近型ADC，可通过/.CSThe input provides precise control over the conversion

apply
 

• Battery-powered system
• Medical instruments
• Remote data collection
• Isolated data acquisition

Professional sensors