ADUM7223CCCZ-RL7

ADuM7223It's a one4 A isolated half-bridge gate driver, using Analog DevicesiCoupler® technology that provides independent and isolated high-side and low-side outputs. These isolation devices combine high-speed CMOS with monolithic transformer technology to have excellent performance characteristics over alternative devices such as pulse transformers and nonisolated gate driver combinations. By integrating an isolator and driver in a single package, the propagation delay is only 60 ns maximum, while the propagation skew between channels is 7 ns maximum.

The ADuM7223 provides two independent isolation channels. The ADuM7223 operates from a 3.0 V to 5.5 V supply voltage and is compatible with low voltage systems. The output voltage is over a wide range of 4.5 V to 18 V and is available in three output voltage versions. The 5 x 5 mm, LGA package is available in 2500 V _{DC PEAK}Operating voltage (input-to-output and output-to-output).

These gate drivers offer true galvanic isolation between the input and outputs compared to gate drivers that use a high-voltage level shifting method. As a result, these gate drivers can reliably control the switching characteristics of IGBT/MOSFET configurations over a wide range of positive or negative switching voltages.

apply 

• Switching power supply
• Isolated IGBT/MOSFET gate drivers
• Industrial inverters

• Advantages and features

  • Peak output current: 4 A
  • Operating voltage
    HIGH-SIDE OR LOW-SIDE RELATIVE TO INPUT: 565 VDC PEAK 
    High-side to low-side differential: 700 VDC PEAK
  • High operating frequency:
    1 MHz maximum
  • Precision timing characteristics
    Isolator and driver propagation delay: 60 ns maximum
    Channel-to-channel matching: 7 ns maximum
  • 3.3 V to 5 V input logic
  • 4.5 V to 18 V output drive

  • UVLO：2.5 V V_DD1 A version UVLO: 4.1 V V_DD2
  • CMOS input logic level
  • High common-mode transient immunity: >25 kV/μs
  • Operating junction temperature up to: 125°C
  • Default low output
  • 5 x 5 mm, 14-pin LGA

  
  

  field

  Motor and power control

  • Dedicated motor controller
  • drive
  • Servo and robotics