DAC101C081CIMKX
Product images are for illustrative purposes only
Product details are welcome upon request

DAC101C081CIMKX

  • Category:converter
  • Product Name:10-bit micropower digital-to-analog converter
  • Manufacturers:NSC
  • Production Batch Number:10+
  • Encapsulation:TSOT
  • Stock Status:There is stock
  • Stock Quantity:7680
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the DAC101C081CIMKX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

peculiarity

  • Guaranteed monotony to 10 bits
  • Low Power Operation: 156μA, max@3.3V
  • Extended supply voltage range (2.7 V to +5.5 V)
  • I 2 C-compatible 2-wire interface supporting standard (100kHz), fast (400kHz) and high-speed modes (3.4MHz)
  • Rail-to-rail voltage output
  • Very small package

illustrate

The DAC101C081 is a 10-bit, single-channel, voltage-output digital-to-analog converter (DAC) that operates from +2.7 V to 5.5 V supplies. The output amplifier allows rail-to-rail output swing with 6μsec settling time. The DAC101C081 uses a supply voltage as a reference to provide the widest dynamic output range, typically consuming 132μA while operating at 5.0V. It is available in 6-pin TSOT and LLP packages and is available in three address options (pin selectable).

As an alternative, the DAC101C085 offers 9 I 2 The comet resolves the option and uses an external datum. It has the same performance and settling time as the DAC101C081. It is in an 8-pin MSOP.

The DAC101C081 and DAC101C085 use 2 wires, i 2 C-compatible serial interface that operates in all three speed modes, including high-speed mode (3.4MHz). An external address select pin allows up to three DAC101C081 or 900 DAC101C085 per 2-wire bus device. The DAC101C081 is a pin-compatible alternative that can provide additional address options.

The DAC101C081 and DAC101C085 each have a 16-bit register that controls the operating mode, power-down state, and output voltage. A power-on reset circuit ensures that the DAC output power is up to zero volts. The power-down function reduces power consumption by less than one microwatt. Their low power consumption and small package make these DACs an excellent choice for battery-powered devices. Each DAC operates over an extended industrial temperature range of -40°C to +125°C

The DAC101C081 and DAC101C085 are pin-compatible DACs that also offer 12-bit and 8-bit resolution for each part of the family. The 12-bit DAC sees the DAC121C081 and DAC121C085. The 8-bit DAC sees DAC081C081 and DAC081C085.

Main specifications

resolution

10 bits

Integral Nonlinearity (INL)

± 2 LSB (maximum)

DNL

+0.3 / -0.2 LSB (max)

Settling time

6 μs (max.)

Zero code errors

10 mV (max)

Full-scale error

-0.7%FS (max.)

Power supply

normal

380μW (3V) / 730μW (5V) typical

Power down

0.5μW (3V) / 0.9μW (5V) typical


apply

  • Industrial process control
  • Portable instrument
  • Digital gain and offset adjustment
  • Programmable voltage and current sources
  • Test the equipment

andDAC101C081CIMKXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LTC1322ISW LINEAR 10+ SOP-24 RS232/EIA562/RS485 transceivers
LM94CIMT NSC 08+ TSSOP PI loop fan control
DAC084S085CIMMX NSC 10+ MSOP10 8-bit micropower quad digital-to-analog converter
DAC084S085CISDX NSC 10+ LLP-10 8-bit micropower quad digital-to-analog converter
DAC101C081CISDX NSC 10+ TSOT 10-bit micropower digital-to-analog converter
DAC101C081CIMK NSC 11+ TSOT23-6 10-bit micropower digital-to-analog converter
DAC101C085CIMMX NSC 10+ SOP 10-bit micropower digital-to-analog converter
LM8333GGR8 NSC 09+ BGA-49 Mobile I/O Companion supports keyboard scanning, I/O expansion, PWM
LM2742MTCX NSC 10+ TSSOP-14 N-channel FET synchronous buck regulator controller
LM2742MTC NSC 10+ TSSOP-14 N-channel FET synchronous buck regulator controller

Popular searches


Model Manufacturers lot number encapsulation illustrate
ABCIRHSE06HC2214PCWF80 AB 2023 connector Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches

NSC brand product recommendation


Model Manufacturers lot number encapsulation illustrate
DAC101C081CIMK NSC 11+ TSOT23-6 10-bit micropower digital-to-analog converter
DAC101C085CIMMX NSC 10+ SOP 10-bit micropower digital-to-analog converter
LM8333GGR8 NSC 09+ BGA-49 Mobile I/O Companion supports keyboard scanning, I/O expansion, PWM
LM2742MTCX NSC 10+ TSSOP-14 N-channel FET synchronous buck regulator controller
LM2742MTC NSC 10+ TSSOP-14 N-channel FET synchronous buck regulator controller
LM2759SDX NSC 09+ LLP-12 1A switched capacitor flash LED driver
LM2744MTCX NSC 10+ TSSOP Prebias start-up and synchronous buck controller synchronized from the optional clock
DS38EP100SD NSC 10+11+ 6-LLP 1 to 5 Gbps, power-efficient PowerWise ® series backplane and cable equalizer
LMH0070SQ NSC 10+11+ LLP SD, DVB - ASI SDI serializers and drivers interface with LVDS
DS92LV1224 NSC 10+11+ SSOP-28 30-66 MHz 10-bit deserializer
DS64BR401SQ NSC 10+11+ LLP-54 Four bidirectional repeaters with equalization and de-emphasis
DS90CR288AMTDX NSC 10+11+ TSSOP56 +3.3 V rising edge data strobe LVDS 28-bit channel link receiver - 85 MHz
LMP7707MFX NSC 10+11+ SOT23-5 Precision, CMOS input, RRIO, PowerWise ® series amplifiers compensated for wide supply voltage range
LMV721M7X NSC 10+11+ SC70-5 The PowerWise ® family of low noise, low voltage and low power op amps
LM2594N-5.0 NSC 10+11+ DIP8 SIMPLE SWITCHER Power Converter 150 kHz 0.5A Buck Regulator
LM3578AMX NSC 10+11+ SOP-8 Switching regulators
LM3480IM3-5.0 NSC 10+11+ SOT - 23 Quasi-low dropout linear regulator
LP2992IM5X-3.3 NSC 10+11+ SOT23-5 Micropower 250 mA low noise ultra-low dropout regulator
LP2981IM5-5.0 NSC 10+11+ SOT23-5 Micro 100 mA ultra-low dropout regulator
LM3444MM NSC 10+11+ SO-10 AC - PowerWise ® series of DC offline LED drivers

Categorical search