peculiarity
-
保证单调到12位
-
Low Power Operation: 156μA, max@3.3V
-
Extended supply voltage range (+2.7 V to +5.5 V)
-
I
2
C-compatible 2-wire interface supporting standard (100kHz), fast (400kHz) and high-speed modes (3.4MHz)
-
Rail-to-rail voltage output
-
Very small package
illustrate
DAC121C081是一个12位,单通道,电压输出数字 - 模拟转换器(DAC),工作于+2.7 V至5.5V电源供电。
输出放大器允许轨到轨输出摆幅和8.5μsec解决时间。
DAC121C081使用的电源电压作为参考提供最宽的动态输出范围,典型功耗为132μA,而在5.0V的工作。
It is available in 6-pin TSOT and LLP packages and offers three address options (pin selectable).
作为替代方案,DAC121C085提供9个我
2
Comet treatment options and use external references.
它具有相同的性能和稳定时间的DAC121C081。
It is in an 8-pin MSOP.
DAC121C081和DAC121C085使用2线,我
2
C-compatible serial interface that operates in all three speed modes, including high-speed mode (3.4MHz).
外部地址选择引脚,允许DAC121C081或9 DAC121C085每2线总线设备。
的DAC121C081是可以提供额外的地址选项的引脚兼容的替代品。
DAC121C081和DAC121C085每个有一个16位的寄存器,它控制的运作模式,掉电条件,并输出电压。
A power-on reset circuit ensures that the DAC output power is up to zero volts.
Power-down function reduces power consumption by less than one microwatt.
Their low power consumption and small package make these DACs an excellent choice for battery-powered devices.
Each DAC operates over an extended industrial temperature range of -40°C to +125°C
DAC121C081和DAC121C085是8和10位分辨率,还提供引脚兼容的DAC系列的每一部分。
The 8-bit DAC sees DAC081C081 and DAC081C085.
10位DAC看到DAC101C081和DAC101C085。
Main specifications
resolution
|
12 bits
|
Integral Nonlinearity (INL)
|
± 8 LSB (maximum)
|
DNL
|
0.6 / -0.5 LSB(最大值)
|
Settling time
|
8.5 μs (max)
|
Zero code errors
|
10 mV (max)
|
Full-scale error
|
-0.7%FS (max)
|
Power supply
|
normal
|
380μW (3V) / 730μW (5V) typical
|
Power down
|
0.5μW (3V) / 0.9μW (5V) typical
|
apply
-
Industrial process control
-
Portable instrument
-
Digital gain and offset adjustment
-
Programmable voltage and current sources
-
Test the equipment