DS90LV047ATMTCX

• "400 Mbps (200 MHz) switching rate
• Stream simplifies PCB layout through pins
• Typical differential offset of 300 ps
• Maximum differential offset of 400 ps
• Maximum transmission latency of 1.7 ns
• 3.3V power supply design
• ± 350 mV differential signal
• Low power consumption (13mW at 3.3V static)
• Interoperable with existing 5V LVDS receivers
• High impedance output power is reduced in LVDS
• Compliant with TIA/EIA-644 LVDS standards
• Industrial operating temperature range (-40°C to +85°C)
• Can be used on surface mount (SOIC); and a low-profile TSSOP package

illustrate

The DS90LV047A is a four-stream CMOS designed for applications that require ultra-low power consumption and high data rates through differential line drives. The device is designed to support redundant data rates at 400 Mbps (200 MHz) utilizing Low Voltage Differential Signal (LVDS) technology.

The low-voltage DS90LV047A accepts TTL/CMOS input levels and converts them into low-voltage (350 mV) differential output signals. In addition, the driver supports a three-state ® function that can be used to disable the output stage, disabling the load current, thus removing the device in a typical idle state at an ultra-low power of 13 mW. There is a flowing DS90LV047A through the lead wire to facilitate PCB layout.

* EN and EN inputs are combined to control the three-state output. The handicap applies to all four drivers. and companion DS90LV047A-line receivers (DS90LV048A) provide a new alternative to high-power pseudo-electrochemiluminescence high-speed point-to-point interface application devices.