EL5146

• Rail-to-rail output swingRail-to-rail output swing
• -3dB bandwidth = 100MHz- 3dB bandwidth = 100MHz
• Single-supply +5V operationSingle-supply +5 V operation
• Power-down to 2.6µAPower down to 2.6μA
• Large input common-mode range 0V CMThe large input common-mode range is 0V
  centimeter

  Diff gain/phase = 0.1%/0.1°

  Differential gain/phase = 0.1%/0.1°

  Low power 35mW per amplifier

  Low power 35mW per amplifier

  Space-saving SOT23-5, MSOP8 & 10, & QSOP16 packages

  Space-saving SOT23-5, MSOP8&10, & QSOP16 packages

  Pb-Free available (RoHS compliant)

  The EL5144 series amplifiers are voltage-feedback, high speed, rail-torail amplifiers designed to operate on a single +5V supply.

  The EL5144 series amplifiers are voltage feedback, high speed, and designed to operate on a single +5 V rail torail torail.

  They offer unity gain stability with an unloaded -3dB bandwidth of 100MHz.

  They provide unity gain stabilization with offloading to 100MHz - 3dB bandwidth.

  The input commonmode voltage range extends from the negative rail to within 1.5V of the positive rail.

  The railway in the input common-mode voltage range is positive from a negative rail of 1.5V.

  Driving a 75Ω double terminated coaxial cable, the EL5144 series amplifiers drive to within 150mV of either rail.

  Drive a double-ended 75Ω coaxial cable, EL5144 series amplifier driver within any supply voltage of 150mV.

  The 200V/µs slew rate and 0.1%/0.1° differential gain/differential phase makes these parts ideal for composite and component video applications.

  The 200V/μs slew rate and 0.1%/0.1° differential gain/differential phase make these parts ideal for composite and component video applications.

  With their voltage-feedback architecture, these amplifiers can accept reactive feedback networks, allowing them to be used in analog filtering applications These amplifiers will source 90mA and sink 65mA.

  Due to their voltage feedback architecture, these amplifiers can accept a reactive feedback network, allowing them to use these amplifiers in analog filtering applications to source and sink 65 mA 90 mA.

  The EL5146 and EL5246 have a power-savings disable feature.

  The EL5146 and EL5246 have a power-saving disable function.

  Applying a standard TTL low logic level to the CE (Chip Enable) pin reduces the supply current to 2.6µA within 10ns.

  A standard TTL logic level is applied to reduce supply current by 2.6μA from 10ns to the CE (chip enable) pin.

  Turn-on time is 500ns, allowing true break-beforemake conditions for multiplexing applications.

  The opening time is 500ns, allowing a real breakthrough beforemake for multiplex application conditions.

  Allowing the CE pin to float or applying a high logic level will enable the amplifier.

  Leaving the CE pin dangling or applying logic high will make the amplifier.

  For applications where board space is critical, singles are offered in a 5-pin SOT-23 package, duals in 8- and 10-pin MSOP packages, and quads in a 16-pin QSOP package.

  Board space is critical in applications, and singles are available in 5-pin SOT-23 packages, in 8-dual- and 10-pin MSOP packages, as well as 16-pin QSOP packages in quads.

  Singles, duals, and quads are also available in industrystandard pinouts in SO and PDIP packages.

  Singles, duals, and holy cities are also available in SO and PDIP packages with industry standard pins.

  Pricing / Packaging / Samples / Ordering

  Pricing/Packaging/Samples/Ordering

  iBuy direct from Intersil

  iBuy comes directly from Intersil

  iBuy direct - out of stock

  iBuy Direct - Out of stock

  Request samples

  Request a sample

  Check distributor inventory

  Inventory checks by distributors

  Available in RoHS/Pb-Free

  The RoHS directive is located in/lead-free

  Part No.

  Part number

  Design-In

  Design in

  Status

  Temp.

  MSL

  sea level

  Price

  Price

  US $

  Dollar

  InActive

  void

  Ind

  8 Ld PDIP

  8-pin PDIP package

  ñ/a

  EL5146CS

  8 Ld SOIC

  EL5146CS-EVAL

  EL5146CS pyrolysis

  Eval Board

  EL5146CS-T13

  EL5146CS - T13

  8 Ld SOIC T+R

  8-pin SOIC package tons + t

  EL5146CS-T7

  EL5146CS - T7 starts

  EL5146CSZ

  EL5146CSZ-T13

  EL5146 - T13

  EL5146CSZ-T7

  EL5146 - T7 Boot

  The price listed is the manufacturer's suggested retail price for quantities of 1K units.

  The listing price is the manufacturer's suggested retail price for the number of units 1K there.

  However, prices in today's market are fluid and may change without notice.

  However, market prices are liquid today and can be changed without notice.

  = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020

  = Moisture sensitivity rating - J according to IPC / JEDEC - STD - 020

  = Standard Microcircuit Drawing

  = Standard microcircuit drawings

  Datasheet(s):

  Data sheet (supplement):

  No Models Available

  No model is available

  Video amplifiers

  5V analog signal processing

  5V analog signal processing

  Multiplexers

  Line drivers

  Portable computers

  High speed communications

  High-speed communication

  Sample & hold amplifiers

  Sample-and-hold amplifiers

  Comparators

  EL5144

  EL5144, 100MHz single rail-to-rail amplifier, 100MHz Single-Supply Rail-to-Rail Amplifiers

  EL2142

  EL2142, Differential Line Receiver

  EL2141

  EL2141, 150MHz differential twisted pair driver, 150 MHz Differential Twisted Pair Driver

  EL5234

  EL5234, 650MHz 5x Gain Low Noise Amplifiers, 650MHz, Gain of 5, Low Noise Amplifiers

  EL5235

  EL5235, 650MHz 5x Gain Low Noise Amplifier, 650MHz, Gain of 5, Low Noise Amplifiers _centimeter
• Diff gain/phase = 0.1%/0.1°Differential gain/phase = 0.1%/0.1°
• Low power 35mW per amplifierLow power 35mW per amplifier
• Space-saving SOT23-5, MSOP8 & 10, & QSOP16 packagesSpace-saving SOT23-5, MSOP8&10, & QSOP16 packages
• Pb-Free available (RoHS compliant)Lead-free available (RoHS compliant)

The EL5144 series amplifiers are voltage-feedback, high speed, rail-torail amplifiers designed to operate on a single +5V supply.The EL5144 series amplifiers are voltage feedback, high speed, and designed to operate on a single +5 V rail torail torail. They offer unity gain stability with an unloaded -3dB bandwidth of 100MHz.They provide unity gain stabilization with offloading to 100MHz - 3dB bandwidth. The input commonmode voltage range extends from the negative rail to within 1.5V of the positive rail.The railway in the input common-mode voltage range is positive from a negative rail of 1.5V. Driving a 75Ω double terminated coaxial cable, the EL5144 series amplifiers drive to within 150mV of either rail.Drive a double-ended 75Ω coaxial cable, EL5144 series amplifier driver within any supply voltage of 150mV. The 200V/µs slew rate and 0.1%/0.1° differential gain/differential phase makes these parts ideal for composite and component video applications.The 200V/μs slew rate and 0.1%/0.1° differential gain/differential phase make these parts ideal for composite and component video applications. With their voltage-feedback architecture, these amplifiers can accept reactive feedback networks, allowing them to be used in analog filtering applications These amplifiers will source 90mA and sink 65mA.Due to their voltage feedback architecture, these amplifiers can accept a reactive feedback network, allowing them to use these amplifiers in analog filtering applications to source and sink 65 mA 90 mA.

The EL5146 and EL5246 have a power-savings disable feature.The EL5146 and EL5246 have a power-saving disable function. Applying a standard TTL low logic level to the CE (Chip Enable) pin reduces the supply current to 2.6µA within 10ns.A standard TTL logic level is applied to reduce supply current by 2.6μA from 10ns to the CE (chip enable) pin. Turn-on time is 500ns, allowing true break-beforemake conditions for multiplexing applications.The opening time is 500ns, allowing a real breakthrough beforemake for multiplex application conditions. Allowing the CE pin to float or applying a high logic level will enable the amplifier.Leaving the CE pin dangling or applying logic high will make the amplifier.

For applications where board space is critical, singles are offered in a 5-pin SOT-23 package, duals in 8- and 10-pin MSOP packages, and quads in a 16-pin QSOP package.Board space is critical in applications, and singles are available in 5-pin SOT-23 packages, in 8-dual- and 10-pin MSOP packages, as well as 16-pin QSOP packages in quads. Singles, duals, and quads are also available in industrystandard pinouts in SO and PDIP packages.Singles, duals, and holy cities are also available in SO and PDIP packages with industry standard pins. All parts operate over the industrial temperature range of -40°C to +85°C.All devices operate at -40°C and an industrial temperature range of 85°C

• Video amplifiersVideo amplifier
• 5V analog signal processing5V analog signal processing
• MultiplexersMultiplexer
• Line driversLine driver
• Portable computersLaptops
• High speed communicationsHigh-speed communication
• Sample & hold amplifiersSample-and-hold amplifiers
• Comparatorscompare