home page>Product Center> Operational amplifiers
MAX4354
Product images are for illustrative purposes only
Product details are welcome upon request

MAX4354

  • Category:Operational amplifiers
  • Product Name:Low cost, +3 V/+5 V620μA, 200MHz, single-supply, rail-to-rail output op amp
  • Manufacturers:MAXIM
  • Production Batch Number:12+
  • Encapsulation:SC70-5
  • Stock Status:There is stock
  • Stock Quantity:30000
  • Minimum order quantity: 1
  • Details:Click here to find PDF information for the MAX4354
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

MAX4354Low cost, +3 V/+5 V620μA, 200MHz, single supply, rail-to-rail outputOperational amplifiers

description

A single MAX4452/MAX4352, MAX4453/MAX4353 dual, MAX4454/MAX4354 quad amplifiers combine ultra-low-power, high-speed performance. The MAX4452/MAX4453/MAX4454 are unity-gain stable and achieve a −3dB bandwidth of 200MHz, while the MAX4352/MAX4353/MAX4354 are +5 V/V with minimal closed-loop gain compensation of 80MHz and a -3dB bandwidth. With supply current per amplifier, these devices consume only 620μA.

These amplifiers operate from a single supply of +2.7 V to +5.25 V and have rail-to-rail outputs. With a good speed/power ratio of 323MHz/mA, these devices feature a slew rate of 95V/μs and fast rise and fall times of 20ns. These devices require wide bandwidth, ideal for low-power/low-voltage systems such as mobile phones and keyless entry systems.

The MAX4452/MAX4352 are small 5-pin SC70 and SOT23 packages, while the MAX4453/MAX4353 are tiny 8-pin SOT23 thin SOT23 SOT23 SO packages. The MAX4454/MAX4354 are available in space-saving 14-pin TSSOP and SO packages.

Key features

  • Ultra-low 620μA supply current
  • High-Speed (MAX4452/MAX4453/MAX4454)
    • -3dB bandwidth of 200MHz
    • 0.1dB gain flatness at 30MHz
    • 95V/μs slew rate
  • High Speed (MAX4352/MAX4353/MAX4354)
    • -3dB bandwidth of 80MHz
    • 0.1dB gain flatness at 4MHz
    • 240V/μs slew rate
  • +3 V single/+5 V operating voltage
  • Rail-to-rail output
  • Ultra-small SC70-5, SOT23-5, SOT23-8 and low profile SOT23-8 packages
  •      

    Application/Purpose

    • Audio system
       
    • Baseband applications
       
    • Battery-powered applications
       
    • Door opening and closing
       
    • Portable communication devices
    • chart

      MAX4352, MAX4353, MAX4354, MAX4452, MAX4453, MAX4454: Pin Configuration
      Pin configuration

andMAX4354Related ICs are:


Model Manufacturers lot number encapsulation illustrate
B43545A5107M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 100UF 20% 450V SNAP
B43545A5567M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 560UF 20% 450V SNAP
B43545A9687M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 680UF 20% 400V SNAP
B43545A9337M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 330UF 20% 400V SNAP
B43545A9827M002 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 820UF 20% 400V SNAP
B43545A5397M000 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 390UF 20% 450V SNAP
B43545A9187M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 180UF 20% 400V SNAP
B43545A5127M002 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 120UF 20% 450V SNAP
B43545A9827M062 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 820UF 20% 400V SNAP
B43545A5477M060 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 470UF 20% 450V SNAP
B43545A5277M000 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 270UF 20% 450V SNAP
B43545A5567M007 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 560UF 20% 450V SNAP
B43545A9157M002 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 150UF 20% 400V SNAP
B43545A9157M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 150UF 20% 400V SNAP
B43545A5477M000 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 470UF 20% 450V SNAP
B43545A9827M000 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 820UF 20% 400V SNAP
B43545A9567M000 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 560UF 20% 400V SNAP
B43545A9687M087 TDK Epcos 17+ DIP -40 degrees + 105 degrees CAP ALUM 680UF 20% 400V SNAP
B43545A5567M002 TDK Epcos 17+ DIP -40°+105°C CAP ALUM 560UF 20% 450V SNAP
B43545A9687M TDK Epcos 17+ DIP -40°+105°C 680uF 400V

Popular searches


Model Manufacturers lot number encapsulation illustrate
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62 ABB 2016+ Contactors 4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62
62EM1-00001 Microchip 2023+ Development board AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D212-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R Omron 2023+ sensor Standard Proximity Sensor
AF16ZB-30-10RT-23 ABB 2023+ Contactors Contactor 48-130V50/60HZ-DC Contactor
TNL22ERT ABB 2023+ Relays ABB-CONTACTORS,OLS,MMPS - TRACTION AND RAIL, A LINE

MAXIM BRAND PRODUCT RECOMMENDATIONS


Model Manufacturers lot number encapsulation illustrate
MAX4353 MAXIM 12+ SC70-5 Low cost, +3 V/+5 V620μA, 200MHz, single-supply, rail-to-rail output op amp
MAX4352 MAXIM 12+ SC70-5 Low cost, +3 V/+5 V620μA, 200MHz, single-supply, rail-to-rail output op amp
MAX4384 MAXIM 12+ TSSOP Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4383 MAXIM 12+ TSSOP Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4382 MAXIM 12+ TSSOP Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4381 MAXIM 12+ TSSOP Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4380 MAXIM 12+ TSSOP Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4396 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4395 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4394 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4393 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4392 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4390 MAXIM 12+ SC70-6 Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4386E MAXIM 12+ SOT23-5 Low-cost, 230MHz single/quad op amps with rail-to-rail output and ±15kV ESD protection
MAX4385E MAXIM 12+ SOT23-5 Low-cost, 230MHz single/quad op amps with rail-to-rail output and ±15kV ESD protection
MAX4031E MAXIM 11+ TSSOP Low-cost, 144MHz, dual/triple op amps with ± 15kV ESD protection
MAX4030E MAXIM 11+ TSSOP Low-cost, 144MHz, dual/triple op amps with ± 15kV ESD protection
MAX9552 MAXIM 12+ SOT23 High current VCOM driver buffer for TFT LCD
MAX9551 MAXIM 12+ SOT23 High current VCOM driver buffer for TFT LCD
MAX9550 MAXIM 12+ SOT23 High current VCOM driver buffer for TFT LCD

Categorical search