SN65HVD231

illustrate

The SN65HVD230, SN65HVD231 and SN65HVD232 controller area network (CAN) transceivers are designed for use with the Texas Instruments TMS320Lx240x; 3.3 - V, DSP with CAN controller, or equivalent device. They are intended to be used in applications employing people in accordance with the physical layer of CAN serial communication with the ISO 11898 standard. Each CAN transceiver design provides differential transmit capability, bus and differential receive speeds up to 1 Mbps CAN controller capability.

Designed to operate in special-harsh environments, these devices feature cross-wire protection, loss of ground and overvoltage protection, overtemperature protection, and a wide common-mode range.

characteristic

• Operating, with a 3.3 V supply
• Low-power PCA82C250 footprint replacement
• The bus/pin ESD protection exceeds 16 kV HBM
• The high input impedance allows 120 nodes on the bus
• Improvements to control drive output conversion time
  Signal quality SN65HVD230 and SN65HVD231
• Electrical nodes do not interfere with the bus
• Compliant with the requirements of the ISO 11898 standard
• Low current standby mode 370 μA SN65HVD230 typical
• Low current SN65HVD231 40 nA typical sleep mode
• Designed for signal transmission rate^（1）Up to 1 megabit per second (Mbps)
• Thermal shutdown protection
• Open circuit fail-safe design
• Interference-free and brownout protection for hot-swap applications
• apply
  • Motor control
  • Industrial automation
  • Base station control and status
  • robot
  • Car
  • UPS control