SN65HVD235

illustrate

The SN65HVD233, SN65HVD234 and SN65HVD235 are used for use in Employer Controller Area Networks (CAN) applications according to the physical layer of serial communication with the ISO 11898 standard. As a CAN transceiver, each provides the difference between transmit and receive CAN buses and CAN controller functions with signal transmission rates up to 1 Mbps.

Designed for operation in particularly harsh environments, the equipment features cross-wire, overvoltage and overtemperature protection, common-mode ± 100 V transient protection device grounding protection± 36 V loss, 12-V common mode in a -7-V operation with a maximum range of 60 nodes on the bus.

If the common-mode range is limited to the range of -2 V to 7 volts via the ISO-11898 standard, up to 120 nodes can be connected on the bus.

characteristic

• Bus pin fault protection exceeds ± 36 volts
• The ESD protection of the bus pins exceeds 16 kV HBM
• Gifts/ICT Standard (SN65HVD234)
• Compatible with ISO 11898
• Signal transmission rate^（1）Up to 1 Mbps
• Extended - 7 V to 12 V common-mode range
• The high input impedance allows 120 nodes
• LVTTL's I/O is 5-V tolerant
• Adjustable signal conversion time for driver quality improvement
• Electrical nodes do not interfere with the bus
• Low current standby mode. 。 。 200 μA typical
• Low current sleep mode. 。 。 50 nA typical (SN65HVD234)
• Thermal shutdown protection
• Power-Up/Down is interference-free bus inputs and outputs
  • High and low V input impedance_andCC
  • Power bikes in a single chip
• Loopback Available Diagnostic Features (SN65HVD233)
• Loopback for Auto Baud Rate Feature Available (SN65HVD235)
• DeviceNet vendor number: 806
• apply