home page>Product Center> Audio amplifier
TAS5611
Product images are for illustrative purposes only
Product details are welcome upon request

TAS5611

  • Category:Audio amplifier
  • Product Name:125W stereo/250W mono PurePath™ HD analog input power stage
  • Manufacturers:TI
  • Production Batch Number:10+
  • Encapsulation:64HTQFP
  • Stock Status:There is stock
  • Stock Quantity:7000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the TAS5611
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

TAS5611 125W stereo/250W mono PurePath™ HD analog input power stage

illustrate

 

The TAS5611A is a high-performance analog input Class D amplifier with integrated capability, closed-loop feedback PurePath™ with HD technology (known to drive up to 125W).(1)Stereo sound is provided from a single 32.5V to 4 to 8Ω speakers.

PurePath™HD technology enables the performance of conventional Class AB amplifiers" (

Unlike traditional Class D amplifiers, the distortion curve increases only once to the output level shift of the clip.

PurePath™HD technology reduces equipment idle losses and makes it more efficient.

 

characteristic

 

  • PurePath™ HD enabled integrated feedback provides:
    • The signal bandwidth is 80kHz high frequency from HD content sources
    • The total harmonic distortion is ultra-low at 0.03% at 1W to 4Ω
    • Total harmonic distortion flattens natural sounds at all frequencies
    • 80dB power supply rejection ratio (off-line, no input signal)
    • The > is a 100dB (A-weighted) signal-to-noise ratio
    • Click for free start
  • Pin compatible with TAS5630, TAS5615 and TAS5613
  • Various configurations are possible on the same PCB as the packing option:
    • Single Bridge Parallel Connection Load (PBTL)
    • Stereo Bridge Load (BTL)
    • 2.1 Single-ended pair stereo speaker and bridge connection load
  • 10% THD total output power + noun
    • The 250W mono PBTL is configured to 2Ω
    • In a stereo BTL configuration, 125W is 4Ω per channel
  • The BTL configuration has a total output power of 1% THD+N
    • 130 watts stereo sound is 3Ω
    • 105W stereo is 4Ω
    • 70W power stereo to 6Ω
    • 55 watts stereo is 8Ω

andTAS5611Related ICs are:


Model Manufacturers lot number encapsulation illustrate
AD5611BKSZ-REEL7 ADI 15+ 6 ld LFCSP 2.7V to 5.5V, less than 100 μA, 12-bit nanoDAC, SPI interface,® available in LFCSP and SC70 packages
AD5611BKSZ-500RL7 ADI 15+ 6 ld LFCSP 2.7V to 5.5V, less than 100 μA, 12-bit nanoDAC, SPI interface,® available in LFCSP and SC70 packages
AD5611AKSZ-REEL7 ADI 15+ 6 ld LFCSP 2.7V to 5.5V, less than 100 μA, 12-bit nanoDAC, SPI interface,® available in LFCSP and SC70 packages
AD5611AKSZ-500RL7 ADI 15+ 6 ld LFCSP 2.7V to 5.5V, less than 100 μA, 12-bit nanoDAC, SPI interface,® available in LFCSP and SC70 packages
AD5611ACPZ-RL7 ADI 15+ 6 ld LFCSP 2.7V to 5.5V, less than 100 μA, 12-bit nanoDAC, SPI interface,® available in LFCSP and SC70 packages
AFCT-5611Z AVAGO: Agilent 10+11+ 1x9 1.25 GBd GBIC transceiver
CPH5611-TL Sanyo 04+ SOT-153 Brand new original
PMB5611RV1.1 Infineon 03+ TSSOP-38P Brand new original in stock
HFCT-5611 Agilent Up-to-date updates N/A Brand new original
2SC5611 Sanyo 03+ TO-126F Brand new original
HN29V25611AT50H HITACHI 04+ TSOP-48 Brand new original
SZM-65611 ZILOG 06+ DIP Brand new original
UCC5611DWP NEC 2001 SOP Original in stock
TAS5611 TI 10+ 64HTQFP 125W stereo/250W mono PurePath™ HD analog input power stage
EL5611 INTERISL 09+ SOP EL5611, 60MHz Rail-to-Rail Input-Output VCOM Amplifiers, 60MHz Rail-to-Rail Input-Output VCOM Amplifiers
LA5611 AP 05+ TO252  
LA5611 SANYO 01+ .ZIP  

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
TLE2144-EP TI 10+ 16SOIC Enhanced Excaliber low-noise, high-speed, accurate quad op amps
TAS5612 TI 09+ TQFP64 125W stereo/250W mono PurePath(TM) HD digital input power stage
TAS5613 TI 10+ 64HTQFP 150W stereo PurePath(TM) HD analog input power stage
TAS5711 TI 10+ 48HTQFP 2.1W stereo I2S audio amplifier with speaker equalization, DRC, and 20 support
TAS5713 TI 10+ 48HTQFP Digital audio power amplifier
TAS5715 TI 10+ 32QFN 25W stereo I2S audio amplifier with speaker equalization, dual-band DRC and DC protection
TPA3117D2 TI 10+ 32QFN 15W stereo filterless Class D amplifier
TAS5717 TI 10+ 48HTQFP TAS5717 digital input stereo amplifier with integrated capacitor, headphone amplifier
TLE2144AM TI 10+ 14CDIP, 20LCCC High-speed, high-drive precision quad op amps
TLE2144M TI 10+ 14CDIP, 16SOIC, 20LCCC High-speed, high-drive precision quad op amps
TAS5631B TI 2010+ QFN 8 PWM input 300W stereo Class-D amplifier with integrated feedback
TPA4860 TI 09+ SOP16 1W mono audio power amplifier
TPA4861 TI 09+ SOP-8 1W mono audio power amplifier
TPA302 TI 09+ SOP-8 0.3W stereo audio power amplifier
TPA301 TI 2010+ MSOP-8 0.35W mono audio power amplifier
TPA701 TI 10+ MSOP-8 700mW low voltage audio power amplifier
TPA711 TI 08+ MSOP8 Mono Class AB audio amplifier with mono headphone driver
TPA721 TI 10+ MSOP-8 Mono Class AB audio amplifier with active, high-level shutdown
TLE2161AM TI 07+ 20LCCC, 8CDIP Excalibur JFET inputs drive micropower op amps with high outputs
TPA0212 TI 08+ TSSOP-24 Stereo Class AB audio amplifier with stereo headphone driver and integrated gain

Categorical search