TPS40192

illustrate

The TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from a 4.5 V to 18 V input. These controllers are implemented in either a voltage-mode control architecture with a fixed switching frequency of 600 kHz (TPS40192) or 300 kHz (TPS40193). Higher switching frequencies facilitate smaller inductors and output capacitors, providing a compact power solution. An adaptive anti-crossover scheme is used to prevent current from being shot at the power FET.

Short-circuit detection is performed by detecting the voltage drop of the low-side MOSFET across the opposite side and comparing it to the threshold of 100 millivolts, 200 millivolts, or 280 millivolts. The threshold sets a single external connection to the ground resistance from the game.

characteristic

• Input operating voltage range: 4.5 V to 18 V
• Up to 20 - A output current
• Supports prebiased outputs
• 0.5%, 591 mV reference
• 600 kHz (TPS40192) and 300 kHz (TPS40193) switching frequency
• Three selectable thermally compensated short-circuit protection levels
• Hiccup restart failure
• Internal 5-V regulator
• High-side and low-side FETs_targetR_DS（ON）Current sensing
• 10-pin 3mm × 3mm SON packages
• Built-in 4 ms soft-start time
• Thermal shutdown protection at 145 ° C
• apply
  • The client device of the cable modem
  • Digital set-top box
  • Graphics card/sound card
  • Entry-level and mid-range servers