TPS7A6150-Q1

illustrate

The TPS7A60xx/TPS7A61xx is a low dropout linear voltage low power consumption and quiescent current less than 25μA design in light load series regulator applications. These devices have integrated overcurrent protection, the purpose of which is to achieve stable operation of ceramic capacitors with low ESR, even . The power-on reset delay is a regulation that implements start-up in the device and indicates output voltage stability. The power-on reset delay is fixed (250μs typical) and can also be programmed by an external capacitor. The low voltage tracking feature allows for a smaller input capacitor, which can eliminate the need for the possible use of a boost converter in cold crank conditions.

characteristic

• Low differential pressure
  • At I = 300mV_output150mA
• Wide input voltage range of 4 - V to 40 V
  With transients up to 45 - V
• 300 - mA maximum output current
• Ultra-low quiescent current
  • Myself_Static= 25μA (typical) at light load
  • I_{Go to bed}
• Fixed output voltages of 3.3 V and 5 V
• Stability of ceramic output capacitors with low ESR
• Integrated power-on reset
  • Programmable delay
  • Open-drain reset output
• Integrated fault protection
  • Short-Circuit/Over-Current protection
  • Thermal shutdown
• Low input voltage tracking
• Heat-enhanced power pack
  • 5-pin TO-263 (Kowlo-Guangtong/D2PAK package)
  • 5-pin TO-252 (KVU/DPAK package)
• apply