home page>Product Center> DC-DC-Controller

Product images are for illustrative purposes only
Product details are welcome upon request

TPS60300

Category:DC-DC-Controller
Product Name:Single Cell to 3.0V/3.3V, 20mA Dual Output, High Efficiency Charge Pump
Manufacturers:TI
Production Batch Number:09+
Encapsulation:MSOP-10
Stock Status:There is stock
Stock Quantity:9000
Minimum order quantity: 1
Details:

Product introduction

TPS60300 Single-Cell to 3.0V/3.3V, 20mA Dual Output, High Efficiency Charge Pump

illustrate

The TPS6030x boost-regulated charge pump generates an output voltage from 0.9 to 3 V to ± 4% or 3.3 to V to an ±output voltage of 1.8 V to an input voltage of 1.8 V (an alkaline, NiCd or NiMH battery).

Only five small 1 uF ceramic capacitors are required to build a complete high efficiency DC/DC charge pump converter. To achieve high efficiency over a wide input voltage range, the conversion mode between 3x or 4x of the charge pump is automatically selected.

characteristic

Regulated 3 - V or 3.3 V output voltages up to 20 mA output 0.9 V with an input voltage range of 1.8 V
The wide output current range above high power conversion efficiency (up to 90%) is optimized for 1.2 V battery voltage
With 2 additional outputs_{In V IN (}Output 1)
The device quiescent current is less than 35 microamps
Supervisors include; Open-drain or push-pull power good output
No inductance/low EMI required
Only five small, 1μF ceramic capacitors are required
Isolate from battery load during shutdown
Microsmall 10-pin MSOP package
apply
- Pager
- Battery-powered toys
- Portable measuring instruments
- Home automation products
- Medical devices (like hearing aids)
- Application metering based on MSP430 microcontroller
- Portable smart card reader

andTPS60300Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
CRCW06030000Z0EA	VISHAY	14+	0603L	Passive components
TPS60300DGS	TI	N／A	N／A	High-Efficiency, Step-Up, Dual Output Regulated Charge Pump (Output 1 is 2x Input Voltage, Output 2 is 3.3V)
TPS60300	TI	09+	MSOP-10	Single Cell to 3.0V/3.3V, 20mA Dual Output, High Efficiency Charge Pump

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
TPS60243	TI	09+	MSOP-8	170 uVrms zero-ripple switched capacitor boost converter with fixed 3V output for VCO supply
TPS60242	TI	11+	MSOP-8	170 uVrms zero-ripple switched capacitor boost converter with fixed 2.7V output for VCO supply
TPS60241	TI	2010	MSOP8	170 uVrms zero-ripple switched capacitor boost converter with fixed 5.0V output for VCO supplies
OPA656	TI	09+	5SOT-23, 8SOIC	Wideband unity-gain regulated FET input op amp
TPS60240	TI	11+	MSOP8	170 uVrms zero-ripple switched capacitor boost converter with fixed 3.3V output for VCO supply
TPS60231	TI	10+	QFN16	3-channel, 75mA regulated charge pump for LED backlight in 3x3 QFN package Notify me when this product changes
OPA4830	TI	10+	14TSSOP	Low power single-supply wideband op amp
OPA4820	TI	09+	14SOIC, 14TSSOP	Quad, unity-gain, low noise, voltage feedback op amps
OPA3690	TI	10+	16SOIC, 16SSOP/QSOP	Three wideband voltage feedback op amps with disable function
OPA355	TI	07+	6SOT-23, 8SOIC	2.5V 200MHz GBW CMOS single op amp with off-state
OPA2890	TI	09+	10MSOP, 8SOIC	Dual low-power, wideband voltage feedback op amps with disable function
OPA2889	TI	10+	10MSOP, 8SOIC	The dual, low-power, wideband, feedback op amp has a disable voltage
OPA2846	TI	08+	8SOIC	Dual wideband, low noise voltage feedback operational amplifiers
TPS60230	TI	08+	QFN16	5-channel, 125mA regulated current charge pump in a 3x3 QFN package for white LED backlighting
OPA2830	TI	09+	8MSOP, 8SOIC	Two, low-power, single-supply wideband op amps
OPA2822	TI	08+	8MSOP, 8SOIC	SpeedPlus dual wideband low noise operational amplifiers
TPS60213	TI	10+	MSOP-10	Regulated 3.3V 50mA low ripple charge pump with ultra-low operating current
OPA2690	TI	09+	14SOIC, 8SOIC	Dual wideband voltage feedback op amps with disable function
TPS60212	TI	10+	MSOP-10	Regulated 3.3V 50mA low ripple charge pump with ultra-low operating current
TPS60211	TI	09+	10-MSOP	Regulated 3.3V 100mA low ripple charge pump with ultra-low operating current