INA217

所属类别：单电源
产品名称：用于替换 SSM2017 的低噪声低失真仪表放大器
厂商：TI
生产批号：10+
封装：16SOIC, 8PDIP
库存状态：有库存
库存量：500
最低订购量：1
详细资料：

Product Introduction

The INA217 is a low-noise, low-distortion, monolithic instrumentation amplifier. The current feedback circuitry allows the INA217 to have a wide gain bandwidth and good dynamic response over a wide range. The INA217 is ideal for low-level audio signals such as balanced low-impedance microphones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth.

The unique distortion cancellation circuitry reduces distortion at very low levels, even at high gains. The INA217 provides nearly 200 theories of noise performance Source impedance. The INA217 differential input, low noise, and low distortion provide superior performance for professional microphone amplifier applications.

characteristic

Low noise: 1.3nV/ Hertz at 1kHz
Low THD+N: 0.004%, at 1kHz, grams = 100
Wide bandwidth: at G 800kHz = 100
Wide power supply range: ± 4.5V to ± 18V
High CMR: > 100dB
Gain sets an external resistor
DIP-8 and Sol-16 widebody packages
apply
- Professional mic preamp
- Dynamic transducer amplifier
- Differential receiver
- Bridge sensor amplifier

ICs related to INA217 include:

Model	Manufacturers	lot number	encapsulation	illustrate
PHP30NQ15T	NXP	2011+	TO-220	N-channel TrenchMOS(10) standard horizontal FETs
PHW80NQ10T	NXP	2011+	TO-3P	Enhanced FET transistor logic levels
PMV60EN	NXP	2011+	SOT23-3	Enhanced FET transistor logic levels
TPS54283	TI	2010+	TSSOP14	2A DUAL NON-SYNCHRONOUS CONVERTER
TPS54262-Q1	TI	10+	20HTSSOP	Automotive-class 2A, 60V step-down DC/DC converter with low IQ, voltage monitoring, and reset
INA163	TI	10+	14SOIC	Low noise, low distortion instrumentation amplifier
INA156	TI	09+10+	8MSOP	Single-supply, rail-to-rail output CMOS instrumentation amplifier
TPS54260	TI	10+	MSOP-10	3.5V to 60V input, 2.5A step-down converter with Eco-Mode
TPS54240	TI	10+	MSOP-10	3.5V to 42V input, 2.5A buck converter with Eco-Mode
TPS54233	TI	2011+	SOIC-8	3.5V to 28V input, 2A, 1MHz step-down converter with eco-mode

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
VGE1TS181900L	SOURIAU-SUNBANK	24+	connector	Circular MIL Spec Backshells BACKSHELL SZ18
KEYSTONE26	Keystone Electronics	24+	connector	EYELET 0.187" BRASS TIN PLATED
KPSE06E14-19SA206	ITT	24+	connector	Conn Circular SKT 19 POS Crimp ST Cable Mount 19 Terminal 1 Port
KPSE06J14-19P	ITT	24+	connector	Circular MIL Spec Connector KPSE 19C 19#20 PIN PLUG
W-1-005-4STUD	T&M	24+	DIP	SERIES W - Stud Input - 4 Stud Type
ABBH2214SDAM	AB Connectors	2024+	connector	Connector tailpipe
C193A/24EV-U1	Schaltebao	25+	DIP	Voltage 1100v electric current 50A contactor/advantage channel fast delivery
C195A/24EC-U2	Schaltebao	25+	DIP	Contactor/Advantage channel fast delivery
D-U204-E	Mors Smitt	24+	DIP	Instantaneous relays
PW620-18d/2S/R/KS135	FSG	24+	DIP	Stellungsferngeber position sensor potentiometer
ST1-DC12V-F	Panasonic Electronic Components	24+	DIP	Power Relay 12VDC 5DC/8AAC SPST-NO/SPST-NC(31mm 14mm 11.3mm) THT
MER1S1505SC	Murata Power Solutions	24+	DIP	DC DC CONVERTER 5V 1W
P783-Q24-S5-S	CUI Inc	24+	DIP	DC DC CONVERTER 5V 15W
9001-18321C00A	Oupiin	24+	connector	DIN41612 Half R Female 48 Pin
9001-18481C00A	Oupiin	24+	connector	DIN41612 Half R Female 48 Pin
CIR013106T01031819SCNP0406	ITT Interconnect Solutions	2023+	connector	Standard Circular Connector
CIR013106T01031819SCYP0406	ITT Interconnect Solutions	24+	connector	Standard Circular Connector
110IMX35D12D12-8G	Bel Power Solutions	24+	Relays	DC DC CONVERTER 12V 12V 12V 35W
SF400-1F	France Leach	24+	Relays	RAILWAY SOCKET BASE - H MOUNTING STYLE
UTS6JC10E6S	SOURIAU-SUNBANK	23+	connector	CONN PLUG FMALE 6P GOLD SLDR CUP

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
INA163	TI	10+	14SOIC	Low noise, low distortion instrumentation amplifier
INA156	TI	09+10+	8MSOP	Single-supply, rail-to-rail output CMOS instrumentation amplifier
TPS54260	TI	10+	MSOP-10	3.5V to 60V input, 2.5A step-down converter with Eco-Mode
TPS54240	TI	10+	MSOP-10	3.5V to 42V input, 2.5A buck converter with Eco-Mode
TPS54233	TI	2011+	SOIC-8	3.5V to 28V input, 2A, 1MHz step-down converter with eco-mode
INA155	TI	10+	8MSOP, 8SOIC	Single power supply, rail-to-rail output, CMOS instrument amplifier
INA125	TI	08+	16PDIP, 16SOIC	Instrumentation amplifier with precision voltage reference
INA122	TI	10+	8PDIP, 8SOIC	Single supply micropower instrumentation amplifier
TPS54232	TI	1001+	SOP8	3.5V to 28V input, 2A, 300kHz step-down converter with Eco-mode
TPS54228	TI	10+	SOP	A 4.5V to 18V input-to, 2A synchronous step-down SWIFT converter with light load efficiency
TPS54227	TI	10+	SOP	4.5V to 18V input, 2A synchronous step-down SWIFT converter
TPS54226	TI	10+	TSSOP14	4.5V to 18V input, 2A synchronous step-down DCAP2 mode converter with Eco-Mode
TPS54225	TI	10+	HTSSOP14	4.5V to 18V input, 2A synchronous step-down DCAP2 mode converter
TPS54218	TI	2010+	WQFN16	2.95V to 6V input, 2A synchronous buck converter
TPS5420-Q1	TI	10+	SOP8	Automotive 5.5V to 36V input, 2A step-down converter
TPS5420-EP	TI	10+	8SOIC	Enhanced product 5.5V to 36V input, 2A, 500kHz step-down converter
TPS54162-Q1	TI	10+	20HTSSOP	Automotive class 1A, 60V step-down DC/DC converter with low IQ, voltage monitoring and reset functions
INA118	TI	10+	8PDIP, 8SOIC	Precision low-power instrumentation amplifier
INA103	TI	10+	16PDIP, 16SOIC	Low-noise, low-distortion instrumentation amplifier
TPS54160-Q1	TI	10+	10MSOP	Automotive 3.5V to 60V, 1.5A step-down SWIFT(tm) converter with Eco-Mode(tm).

INA217

characteristic

ICs related to INA217 include:

Popular searches

TI brand product recommendation

Taxonomic search

Related Links