TLV2352M
Product images are for illustrative purposes only
Product details are welcome upon request

TLV2352M

  • Category:Comparator
  • Product Name:LinCMOS(TM) dual low voltage differential comparator
  • Manufacturers:TI
  • Production Batch Number:08+
  • Encapsulation:10CFP, 20LCCC, 8CDIP
  • Stock Status:There is stock
  • Stock Quantity:2400
  • Minimum order quantity: 1
  • Details:Click to find the PDF of the TLV2352M
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

The TLV2352 consists of two independent, low-power comparisons specifically designed for single-supply applications and rails up to 2 five, operating from a 3-V supply at low times, with a typical supply current of only 120 microamps.

The TLV2352 is designed with Texas Instruments LinCMOSTMtechnology, so it has an extremely high input impedance (usually greater than 1012 ), which can be connected directly to high-impedance sources. The output is an N-channel open-drain configuration that requires an external pull-up resistor to provide a positive output voltage swing and connect them for positive logic wires and relationships. Features are fully TLV2352I at 3 V and 5 V operation from -40°C to 85°C

characteristic
  • Wide supply voltage range
    2 V to 8 volts
  • Fully defined at 3 V and 5 V
  • Very low supply current drainage
    120 μA typical at 3V
  • The outputs are compatible with TTL, MOS tubes, and CMOS
  • Fast response time. 200 nanoseconds typical TTL level input step
  • High input impedance. 1012 typical
  • Very low input bias current
    5 pA typical
  • The common-mode input voltage range includes ground
  • Built-in ESD protection
parameter
    TLV2352M
Number of channels   2
IQ per channel (max.) (mA)   0.125
Output Current (min) (mA)   6
tRESP Low - To - High (US)   1.3
Output type   Open collector, open drain
VIO (25 degrees Celsius) (max) (millivolts)   5
Pins/Packets   10CFP,20LCCC,8CDIP
VICR (min) (Fri)   0
VICR (max.) (5)   6.75
and (min) (v)   2
and (maximum) (v)   8
Operating temperature range(°C)   -55 to 125

andTLV2352MRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
TLV2352M TI 08+ 10CFP, 20LCCC, 8CDIP LinCMOS(TM) dual low voltage differential comparator

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
TLV2352 TI 09+ 8PDIP, 8SOIC, 8TSSOP Dual low-voltage LinCMOS(TM) differential comparators
TPS5410-Q1 TI 10+ 8SOIC Automotive 5.5V to 36V, 1A, 500kHz step-down SWIFT(tm) converter
TPS5410-EP TI 10+ 8SOIC Enhanced 5.5V to 36V, 1A, 500kHz step-down SWIFT™ converter
TPS54073 TI 10+ HTSSOP28 At 2.2V - 4.0V, 14A asynchronous buck converters are prohibited during start-up
TPS54060-Q1 TI 10+ MSOP-10 3.5V to 60V input, 0.5A buck converter with Eco-Mode
TPS54060 TI 10+ MSOP-10 3.5V to 60V input, 0.5A buck converter with Eco-Mode
TPS54040-Q1 TI 1044+ MSOP-10 3.5V to 42V input, 0.5A buck converter with Eco-Mode
TPS54040 TI 1044+ MSOP-10 3.5V to 42V input, 0.5A buck converter with Eco-Mode
TLV2304 TI 08+ 14PDIP, 14SOIC, 14TSSOP Op amp (2) + open-collector comparator (2) Integrated device IC
TLV2302 TI 09+ 8MSOP, 8PDIP, 8SOIC Op amp (1) + open-collector comparator (1) integrated device IC
TLV1391 TI 11+ 5SOT-23 Single differential comparator with open-collector output
TLC393-Q1 TI 10+ 8SOIC Automotive dual micropower LinCMOS voltage comparator
TLC393 TI 08+ 8PDIP, 8SO, 8SOIC, 8TSSOP Two micropower LinCMOS(TM) voltage comparators
TLC374M TI 08+ 14CDIP, 14SOIC, 20LCCC Low-power LinCMOS(TM) quad comparator
TLC374 TI 09+ 14PDIP, 14SO, 14SOIC, 14TSSOP Four general-purpose LinCMOS(TM) differential comparators
TLC372M TI 08+ 10CFP, 20LCCC, 8CDIP, 8PDIP, 8SOIC Low power LinCMOS(TM) dual comparator
TLC372-EP TI 10+ 8SOIC Enhanced Lincmos dual differential comparator
TLC372 TI 08+ 8PDIP, 8SO, 8SOIC, 8TSSOP Dual universal LinCMOS(TM) differential comparator
TLC3704M TI 10+ 14CDIP, 14SOIC, 20LCCC Low power LinCMOS(TM) quad comparator with push-pull output
TPS54010 TI 10+ TSSOP-28 2.2V-4.0V output synchronous step-down PWM transfer switch with integrated FET

Categorical search