home page>Product Center> Current parallel monitor
INA271
Product images are for illustrative purposes only
Product details are welcome upon request

INA271

  • Category:Current parallel monitor
  • Product Name:Voltage output, Unidrectional measurement current shunt monitor
  • Manufacturers:TI
  • Production Batch Number:10+
  • Encapsulation:8SOIC
  • Stock Status:There is stock
  • Stock Quantity:5000
  • Minimum order quantity: 1
  • Details:Click here to find the INA271 pdf
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

The INA270 with output current and voltage shunt monitoring in the INA271 family can feel the drop in current shunt from -16V to +80 V, independent supply voltage in common-mode voltage. The pins of the INA270 and INA271 enable filtering at any time.

The output voltages of the INA270 and INA271 are available in two sizes: 14V/V and 20V/V The 130kHz bandwidth simplifies the use of current control loops.

The INA270 operates with the INA271 from a single +2.7 V to +18 V supply, drawing a maximum supply current of 900 μA. They are operating in an extended operating range of -40°C to +125°C and are available in SO-8 packages.

characteristic
  • Wide common-mode range: -16 V to +80 V
  • Common-mode rejection ratio: 120dB
  • Precision:
    ± 2.5mV Offset (Max)
    ± 1% gain error (max)
    20μV/°C offset drift (max.)
    55ppm/°C gain drift (max.)
  • Bandwidth: up to 130kHz
  • Two transfer functions are available:
    14V Audio/Video (INA270)
    20V Audio/Video (INA271)
  • Quiescent Current: 900μA Max
  • Power supply: +2.7 V to +18 V
  • Provision filtering
  • apply
    • power management
    • Car
    • Telecommunications equipment
    • laptop
    • Battery charger
    • cell phone
    • Welding equipment
parameter
    INA271
Gain (V/V).   20
Common Mode Input Range (min) (5)   -16 to 80
Maximum input offset (+/-)()(UV)   2500
Maximum input offset drift (+/-)((UV/Celsius)   20
CMRR (minimum) (decibels)   100
Small signal bandwidth (typical) (MHz)   0.13
Quiescent current (+/-)(typical) (mA)   0.7
and (min) (v)   2.7
and (maximum) (v)   18
Pins/Packets   8SOIC

andINA271Related ICs are:


Model Manufacturers lot number encapsulation illustrate
ISO122 TI 10+ 8PDIP 8SOIC Low cost precision isolation amplifier
ISO121 TI 10+ 16CDIP Low cost precision isolation amplifier
INA282 TI 10+ 8SOIC Wide common-mode range, bidirectional, high-accuracy current parallel monitor
INA271A-Q1 TI 10+ 8SOIC Automotive voltage-unidirectional output-measurement current parallel monitor
INA271-HT TI 10+ 0XCEPT, 8CFP High temperature voltage output, high side measurement current, parallel monitor
INA270A-Q1 TI 10+ 8SOIC Automotive voltage-unidirectional output-measurement current parallel monitor
INA270 TI 07+ 8SOIC Download - PDF icon Voltage output, Unidrectional measurement current shunt monitor
INA220 TI 10+ 10MSOP Bidirectional current/power monitor with 12C interface
INA219 TI 08+ 8SOIC, 8SOT-23 Zero-drift, bidirectional current/power monitor in a SOT23 package
MC79M12BDT ON 09+ SOT-252 500 mA negative voltage regulator

Popular searches


Model Manufacturers lot number encapsulation illustrate
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62 ABB 2016+ Contactors 4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62
62EM1-00001 Microchip 2023+ Development board AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D212-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R Omron 2023+ sensor Standard Proximity Sensor
AF16ZB-30-10RT-23 ABB 2023+ Contactors Contactor 48-130V50/60HZ-DC Contactor

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
INA270A-Q1 TI 10+ 8SOIC Automotive voltage-unidirectional output-measurement current parallel monitor
INA270 TI 07+ 8SOIC Download - PDF icon Voltage output, Unidrectional measurement current shunt monitor
INA220 TI 10+ 10MSOP Bidirectional current/power monitor with 12C interface
INA219 TI 08+ 8SOIC, 8SOT-23 Zero-drift, bidirectional current/power monitor in a SOT23 package
INA216A4 TI 10+ 4DSBGA A small, low-power current-sense amplifier for high-side sensing
INA216A3 TI 10+ 4DSBGA A small, low-power current-sense amplifier for high-side sensing
INA216A2 TI 10+ 4DSBGA A small, low-power current-sense amplifier for high-side sensing
INA216A1 TI 10+ 4DSBGA A small, low-power current-sense amplifier for high-side sensing
INA214-Q1 TI 10+ 6SC70 Automotive voltage output, high/low-side measurement, bidirectional zero-drift series
INA214 TI 10+ 10UQFN, 6SC70 Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
INA213A-Q1 TI 10+ 6SC70 Automotive voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
INA213 TI 10+ 10UQFN, 6SC70 Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
TPS54426 TI 10+ 14HTSSOP 4.5V to 18V input, 4A synchronous step-down SWIFT™ converter with light load power savings
TPS54425 TI 10+ TSSOP14 4.5V to 18V input, 4A synchronous step-down SWIFT™ converter with D-CAP2™ mode
TPS54418 TI 10+ QFN-16 A full-featured 6-volt, 4-amp, current-mode converter that synchronizes two integrated MOSFETs in one step
TPS54380-Q1 TI 10+ TSSOP20 3V to 6V Input 3A Synchronous Buck Converter for Sequencing
TPS54380 TI 10+ TSSOP20 3V to 6V Input 3A Synchronous Buck Converter for Sequencing
TPS54377 TI 09+ QFN24 The sucked 3V to 6V input, 3A synchronous buck converter is disabled during startup
TPS54373 TI 10+ TSSOP-20 The sucked 3V to 6V input, 3A synchronous buck converter is disabled during startup
TPS54372-Q1 TI 10+ 20HTSSOP Automotive 3A output tracking/terminal synchronous PWM transfer switch

Categorical search