LMH0302SQ

• SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M standards
• Data rate of 2.97 Gbps
• Supports DVB - ASI at 270 Mbps
• Cable detection output
• Signal loss detection input
• The output control driving force decreases
• Typical power consumption: 130 mW and SD mode 155 milliwatts In HD mode
• Typical power consumption in power-down mode: 4 milliwatts
• Operates from a single 3.3V supply
• Differential input
• 75Ω differential output
• Selectable conversion rates
• Industrial temperature range: -40 °C to +85 °C
• 16-pin LLP package
• The footprint is compatible with the LMH0302

illustrate

The LMH0303 3 Gbps HD/SD SDI cable driver with cable inspection is designed for serial digital video applications in the SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M. The LMH0303 drives a 75Ω transmission line (Belden 1694A, Belden 8281 or equivalent) with data rates as high as 2.97 Gbps.

The LMH0303 includes an intelligent sensing function to improve the diagnosis of the system. This cable detection feature detects the near termination to determine if the cable is properly connected to the output BNC. Input Loss of Signal (LOS) detects the presence of a valid signal at the cable driver input. These sensing functions can be used to alert the user to system faults and activate deep power saving modes, reducing the power consumption of the cable driver by 4 milliwatts. These functions can be accessed through the SMBus interface.

The LMH0303 offers two SMPTE 259M and SMPTE 424M/292M with selectable conversion rates. The output amplitude is regulated in 5 ± 10 mV steps via SMBus%.

The LMH0303 uses a single 3.3V power supply. Power consumption is typically 130 milliwatts in SD mode and HD mode. The LMH0303 is available in a 16-pin LLP package.

apply

• SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M serial digital interfaces
• Digital video routers and switches
• Distribution amplifiers