LP8725TLE-A

• Two high-efficiency step-down DC/DC converters, I OUT = 600 mAh , with a switching frequency of 4MHz, the option uses a small 1μH inductor up to 800 mA.
• Three LDOs with load currents up to 300 mA per digit
• Two low-noise analogue 300 mA LDOs
• Dual low-input low-output regulators at I OUT = 300 mA
• I 2 C compatible interface internal register control
• Adjustable start sequence through I 2 C or configuration
• Thermal shutdown protection

illustrate

This unit is a versatile, programmable power management unit (PMU) optimized for sub-block power solutions. The device integrates two high-efficiency 600 mAh step-down DC/DC converter configurations with dynamic voltage regulation (DVS) 800 mA load via I 2 C, two low-noise analog LDOs, three digital LDOs that can accommodate 300 mA of load current per two low-input low-output (LILO) regulators and one I 2 C is compatible with serial interfaces, allowing the main controller to access internal control registers. The device also features a programmable power-up sequence. LDO regulators offer high PSRR and low noise, making them ideal for power supply to analog and digital loads.

The device can be configured as a module Sub_PMU (e.g., camera/multimedia module) or as a standalone PMU with the power processor itself.

"Notice: This document is not a data sheet. To learn more about this product or to order a sample, please contact your local National Semiconductor sales office or visit //www.national.com/support/dir.html.

Key specifications:

• 190 mV typical. Differential pressure of digital LDO @ 300 mA
• 2% typical. LDO voltage accuracy for digital and analog outputs
• 10μVRMS simulates the output noise of the LDO
• ± 2% typical. Output voltage Buck efficiency up to 93%
• 30-bump micro SMD package (0.5 mm pitch)

apply

• Multimedia processor
• Portable handheld product