DS10BR150TSDX

• DC - 1.0 Gbps low jitter, high interference immunity, low power operation
• On-chip 100Ω input and output termination reduces insertion and return loss, reduces component count, and reduces board space
• The ESD on the 7 kV LVDS I/O pin protects adjacent components
• Small 3mm x 3mm 8 LLP space-saving package

illustrate

The DS10BR150 is a single-channel 1.0 Gbps LVDS buffer lossy FR-4 printed circuit board backplane and balanced cable optimized for high-speed signal transmission. Fully differential signal path for excellent signal integrity and noise immunity.

The wide input common-mode range can accept LVDS, CML, and LVPECL level signals at the output level of the receiver at LVDS. A very small package size with minimal space requirements in the board, while flowing through the pins allows circuit board design work to become easier. The differential inputs and outputs are internally terminated with a 100Ω resistor to reduce the device's input and output return losses, reduce component count, and further reduce board space.

apply

• Clock and data buffering
• OC -​​ 12 / STM - 4
• FireWire 800