- Requires very few external components
- Standard inductor and transformer home
- NPN output switch 5.0A, can stand off-site 65V
- Wide input voltage range: 4V to 40V
- Adjustable switching frequency: 100 kHz to 200 kHz
- External shutdown capabilities
- Draw less than 60μA when shutdown
- Frequency synchronization
- Current mode operation for improved transient response, line gauge and current limiting
- The internal soft-start function reduces inrush current during start-up
- Protects the output transistor from current limiting, undervoltage lockout, and thermal shutdown
- The system's output voltage tolerance ± up to more than 4% of line and load conditions
illustrate
The LM2588 series of voltage regulators are monolithic integrated circuits designed specifically for flyback, step-up, and forward converter applications. The device is available in 4 different output voltage versions: 3.3V, 5.0V, 12V, and adjustable.
Requiring a minimum number of external components, these regulators are cost-effective and easy to use. Typical circuitry for boost and flyback regulators included in the datasheet. Simultaneous listing of diodes and capacitors and standard design work for a home, selection guide for these switching regulator inductors and sweepback transformers.
The power switch is a 5.0A NPN device that can independently shut off 65V. Protect the power switching current and thermal limit circuit, and the undervoltage lockout circuit. The IC contains a frequency-adjustable oscillator that can be programmed to 200 kHz. Oscillators can also be synchronized with other devices, allowing multiple devices to operate at the same switching frequency.
Other features include a soft-start mode to reduce inrush current, transient response to improve input voltage and output load during start-up, and cycle-by-cycle current limit rejection and current mode control. The device also has a shutdown pin so that it can be turned off externally. The output voltage tolerance is ± 4%, and the power supply system is guaranteed under the specified input voltage and output load conditions.
apply
- Flyback regulator
- Forward converter
- Multi-output regulator
- Simple boost regulator
|