DS90LV048ATMX

• > 400 Mbps (200 MHz) switching frequency
• Pinouts to simplify PCB layout through the process
• 150 ps channel-to-channel skew (typical)
• 100 ps differential offset (typical)
• Maximum propagation delay of 2.7 ns
• 3.3V power supply design
• High impedance LVDS input power drops
• Low Power Design (40mW@3.3V Static)
• Available with existing 5V LVDS drivers
• Accepts small swing (350 mV typical) differential signal levels
• Open, short, and stop inputs support fail-safe
• 0V to -100mV threshold region
• Complies with ANSI/TIA/EIA-644 standards
• Industrial operating temperature range (-40 °C to +85 °C)
• Available in SOIC and TSSOP packages

illustrate

The DS90LV048A is a quad-flow CMOS differential line receiver designed for applications requiring ultra-low power consumption and high data rates. The device is designed to support data rates in excess of 400 Mbps utilizing Low Voltage Differential Signaling (LVDS) technology (200 MHz).

The DS90LV048A accepts low-voltage (350 mV typical) differential input signals and converts them to a 3V CMOS output level. Receiver with tri-state ® capability for multiple outputs. The receiver also supports open, short, and stop (100 Fail-safe). The output of the receiver will be fail-safe conditions. The DS90LV048A has a simple PCB layout with flowing through the pins.

The EN and EN inputs are in phase together to control the three-state output. Ability to achieve common all four receptions. The DS90LV048A and companion LVDS line drivers such as the DS90LV047A provide a new alternative to point-to-point high-speed interface applications.