home page>Product Center> Microprocessor/Microcontroller (MicroP/C)
LM98516CCMTX
Product images are for illustrative purposes only
Product details are welcome upon request

LM98516CCMTX

  • Category:Microprocessor/Microcontroller (MicroP/C)
  • Product Name:10-bit, 65 MSPS 6-channel imaging signal processor
  • Manufacturers:NXP
  • Production Batch Number:10+
  • Encapsulation:TSSOP
  • Stock Status:There is stock
  • Stock Quantity:3000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the LM98516CCMTX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

 peculiarity

 

 

  • Operates from a single 3.3V supply
  • CD or S/H handles negative input signal polarity
  • 32.5 MHz channel rate
  • Enhanced ESD protection on timing and control pins
  • Low-power CMOS design
  • 4-wire serial interface
  • 2-channel symmetric architecture
  • Independent gain and offset correction for each channel
  • Digital black level correction for each channel
  • Digital white level calibration for each channel
  • Programmable input clamps

 

illustrate

 

The LM98519 is a fully integrated, high-performance solution for 10-bit, 65 MSPS, signal processing, digital color copiers, scanners and other image processing applications. With the innovative six channels using correlated double sampling (CDS), or sample-and-hold (Shanghai) sampling architecture to achieve high-speed signal throughput. 1x or 2x gain setting for CDS/SH input stage. Each channel has a dedicated 1x to 10x (8-bit) PGA, allowing precise gain adjustment for each channel. The digital white level autocalibration loop automatically sets the PGA value to achieve the selected white target level. Each channel also features a ± 4-bit thick, ±10-bit fine analog offset correction DAC that allows for sampling and holding amplifier offset correction before the DAC. These corrections control the automatic digital black level correction loop. PGA and offset DACs, each channel is independently programmed to allow unique gain values and offsets of six channels. A 2-to-1 multiplexing scheme routes the signals of three 65MHz high performance ADCs. The fully differential processing channel achieves excellent noise immunity and has a very low noise floor of 68 dB. The 10-bit analog-to-digital converter has excellent power performance and is transparent in the image reproduction chain LM98519.

Main specifications

Maximum input level

1.19 VP - P (CDS yield = 1.0)

 

0.58 VP - P (CDS yield = 2.1)

Enter the sample rate

5 to 32.5 MSPS - 6CH mode

 

10 to 32.5 MSPS - 3-channel mode

PGA gain range

1x to 10x (0 to 20 dB)

CDS/SH gain setting

1X or 2.1x

Total channel gain

1x to 20x (0 to 26dB)

PGA gain resolution

8-bit - analogy

ADC resolution

10 bits

The sampling rate of the ADC

10 to 65 MSPS

Signal-to-noise ratio

68 dB (gain = 1X)

Offset DAC range

± 111 mV or ± 60 mV, FDAC

 

± 277 MV - CDAC

Offset DAC resolution

± 10-bit - FDAC

 

± 4-bit - CDAC

Supply voltage

3.0V to 3.6V

Power dissipation

1.04 W (typical)

andLM98516CCMTXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LM98516CCMTX NXP 10+ TSSOP 10-bit, 65 MSPS 6-channel imaging signal processor

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

NXP brand product recommendation


Model Manufacturers lot number encapsulation illustrate
DS90C241QVS NXP 11+ TQFP48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C124QVS NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C124QVSX NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C241QVSX NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90UR124QVS NXP 11+ TQFP-64 5 - 43MHz DC balanced 24-bit FPD - Link's second deserializer
DS90UR124QVSX NXP 10+ TQFP-64 5 - 43MHz DC balanced 24-bit FPD - Link's second deserializer
BB199 NXP 10+ SOD523  
PTVS3V3S1UR NXP 10+ SOD123W  
BFT92 NXP 10+11+ BFT92  
BFQ31AR NXP 10+ SOT-23  
IP4048CX5 NXP 11+PBF SOT-0603 5-channel motor drive circuit
GNS7560 NXP 10+ QFN NXP超低功耗单芯片
BZV85-C18,133 NXP 05+ SOD66 Brand new original
SAA7115AHL NXP 08+ LQFP-100 Brand new original
BT131-600 NXP 08+ TO-92 Brand new original
BT151-650L NXP 09+ TO-220 Unidirectional thyristors
LM75AIMX NXP 10+ SOIC NARROW Digital temperature sensor
PH1225AL NXP 10+ SOT1023 Special optoelectronic devices
TL431AMFDT NXP 10+ SOT23 Adjustable precision shunt regulator
LPC2387FBD100 NXP 0938+ LQFP10 Original

Categorical search