home page>Product Center> Main control chip
DS16EV5110ASQX
Product images are for illustrative purposes only
Product details are welcome upon request

DS16EV5110ASQX

  • Category:Main control chip
  • Product Name:Video equalizer (3D+C) for DVI, HDMI source/repeater/sink applications
  • Manufacturers:NXP
  • Production Batch Number:10+
  • Encapsulation:LLP
  • Stock Status:There is stock
  • Stock Quantity:9850
  • Minimum order quantity: 1
  • Details:Click here to find pdf information for the DS16EV5110ASQX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

 peculiarity

 

  • 8. Horizontal equalization, 3 pin settings or via SMBus interface
  • DC-coupled inputs and outputs
  • Optimized runs from 250 Mbps to 2.25 Gbps with UXGA support for I/P, 480, 720, 1080 I/P, and 1080 P resolutions for 8, 10, and 12-bit color depth
  • Both DS16EV5110A devices support DVI/HDMI dual link
  • DVI 1.0 and HDMI 1.3a standard compatible TMDS interface
  • Clock Channel Signal Detection (LOS)
  • Enable power-saving standby mode
  • The System Management Bus (SMBus) provides boost control, output amplitude, enable, and clock channel signal detection thresholds
  • Low Power: 475mW (typical)
  • The total jitter of 0.13 UI is 1.65 Gbps including cable
  • Single 3.3V supply
  • Small 7mm x 7mm, 48-pin leadless LLP package
  • -40°C to +85°C operating temperature range
  • Extended TMDS lines reach:
  • > 40m 24 AWG DVI line (1.65Gbps)
  • > 20m 28 AWG DVI line (1.65Gbps)
  • > 20m Cat5/Cat5e/Cat6 cable (1.65Gbps)
  • > 20m 28 AWG HDMI cable (2.25Gbps)

 

illustrate

The DS16EV5110A is a multichannel equalizer video cable extension source/repeater/suction optimized for applications. It operates up to 250Mbps with a rate of 1.65Gbps and 2.25Gbps (per data channel) for a common application of 2.25Gbps. It contains three data channels for converting minimized differential signaling (TMDS) and a clock channel specified by DVI and HDMI interfaces. Commercially available high-definition video cables provide skin effect and dielectric loss compensation when transmitting video, a common phenomenon.

The inputs meet the requirements of DVI and HDMI and feature programmable input equalization levels. The programmable equalization level provides optimal signal enhancement and reduced inter-symbol interference. The eight levels of improvement are either pin-selectable or optional through the system management bus interface.

The clock channel up to 225 MHz clock rate is optimized and features signal detection circuitry. To maximize noise immunity, the DS16EV5110A features signal detection with programmable thresholds. Adjustable thresholds via the System Management Bus (SMBus) interface.

The DS16EV5110A can be used in source applications, receive applications, or as a relay.

The DS16EV5110A also provides support system power management and enables control through outputs. The specific application requirements for customization and optimization via SMBus require additional control. These controls include programmable functions such as output amplitude and boost control as well as system-level diagnostics.

The DS16EV5110A is a replacement pin-to-pin DS16EV5110. It has an enhanced CML output and exhibits high impedance when powered down.

 


apply

  • HDMI/DVI extension cable
  • HDMI/DVI switch
  • Projector
  • High-definition display

andDS16EV5110ASQXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
DS16EV5110ASQX NXP 10+ LLP Video equalizer (3D+C) for DVI, HDMI source/repeater/sink applications

Popular searches


Model Manufacturers lot number encapsulation illustrate
ABCIRHSE06HC2214PCWF80 AB 2023 connector Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches

NXP brand product recommendation


Model Manufacturers lot number encapsulation illustrate
DS16EV5110SQX NXP 10+ LLP DVI, HDMI extensions for equalization and retimers and outputs
LMX2531LQX1500E NXP 10+ LLP High-performance frequency synthesizer system with integrated VCO
ADC12020CIVY NXP 10+ LQFP-32 12-bit, 20 MSPS, 185mW A/D conversion internal sample-and-hold
LM98555CCMHX NXP 10+ TSSOP CCD driver
LM98555CCMH NXP 10+ TSSOP CCD driver
LM98516CCMTX NXP 10+ TSSOP 10-bit, 65 MSPS 6-channel imaging signal processor
DS90C241QVS NXP 11+ TQFP48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C124QVS NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C124QVSX NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90C241QVSX NXP 11+ TQFP-48 5 - 35MHz DC balanced 24-bit FPD - Link second serial
DS90UR124QVS NXP 11+ TQFP-64 5 - 43MHz DC balanced 24-bit FPD - Link's second deserializer
DS90UR124QVSX NXP 10+ TQFP-64 5 - 43MHz DC balanced 24-bit FPD - Link's second deserializer
BB199 NXP 10+ SOD523  
PTVS3V3S1UR NXP 10+ SOD123W  
BFT92 NXP 10+11+ BFT92  
BFQ31AR NXP 10+ SOT-23  
IP4048CX5 NXP 11+PBF SOT-0603 5-channel motor drive circuit
GNS7560 NXP 10+ QFN NXP超低功耗单芯片
BZV85-C18,133 NXP 05+ SOD66 Brand new original
SAA7115AHL NXP 08+ LQFP-100 Brand new original

Categorical search