LM80CIMT-3

• Product introduction

 peculiarity

• Temperature sensing
• 7 positive voltage input
• 2 programmable fan speed monitoring inputs
• An LSB of 10 mV and an input range of 2.56V accept the output of LM50, such as a linear temperature sensor
• Chassis burglar monitor input
• Watchdog comparison of all monitored values
• A separate input status is displayed in an interrupt status register, such as an additional external temperature sensor for the LM56 or LM75
• I 2 comet ™ Compatibility of serial bus interfaces
• Shutdown mode to minimize power consumption
• Programmable^ RST_OUT/^OS pin: ^ RST_OUT provides reset output; ^ The OS provides a thermal shutdown event activation interrupt output

illustrate

The LM80 provides a 7 positive voltage input, temperature measurement, measuring fan speed, and hardware monitoring 2 comet ™ Interface. The LM80 performs a comparison of all measurements of the watchdog and an open-drain interrupt output when any value exceeds the programmed limit. Chassis intrusion inputs provide monitoring and reset external circuitry design latch chassis intrusion events.

The LM80 is particularly suitable for linear and digital temperature sensor interfaces. The LSB of 10 mV and the input voltage range of 2.56 volts are ideal for accepting input from linear sensors such as the LM50. ^ BTI use, such as LM75 and LM56 digital or thermostatic sensor inputs.

The LM80 has a supply voltage range of 2.8V to 5.75V, low supply current, and me 2 C interface, ideal for its wide range of applications. These include hardware monitoring and protection applications for personal computers, electronic test equipment, and office electronics.

Main specifications

apply

• Thermal and hardware monitoring systems, servers and PCs
• Office electronics
• Electronic test equipment and instrumentation