home page>Product Center> Operational amplifiers
LMV792MMX
Product images are for illustrative purposes only
Product details are welcome upon request

LMV792MMX

  • Category:Operational amplifiers
  • Product Name:88 MHz, low noise, 1.8V CMOS input, compensatory op amp
  • Manufacturers:NXP
  • Production Batch Number:10+
  • Encapsulation:SOP
  • Stock Status:There is stock
  • Stock Quantity:9850
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the LMV792MMX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

 peculiarity

(Typical 5V power supply, unless otherwise noted)

Input reference voltage noise

5.8 NV / √ hertz

Input bias current

100 FA

Gain-bandwidth product

88 MHz

 

  • Supply current per channel

LMV793

1.15 mA

LMV794

1.30 mA

  • Rail-to-rail output swing

@ 10kΩ load

Railway from 25 millivolts

@ 2kΩ load

Railway from 45 millivolts

Guaranteed 2.5V and 5.0V performance

 

Total harmonic distortion

600 Ω at 0.04% @ 1 kHz

Temperature range

-40°C to 125°C

 

illustrate

The LMV793 (single) and LMV794 (dual) CMOS input operational amplifiers provide low input voltage noise density of 5.8 NV / At the same time, it consumes only 1.15 milliamps (LMV793) of quiescent current. The LMV793/LMV794 are stable with a gain of 10 and have a gain-bandwidth product (GBW) of 88 MHz. The LMV793/LMV794 have a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. Each functional rail-to-rail output stage of the LMV793/LMV794 is capable of driving 600Ω loads and sourcing up to 60 mA.

The LMV793/LMV794 provide the best performance in low voltage and low noise systems. The CMOS input stage, typical input bias current in a few femtosecond amperes range, and input common-mode voltage range, including ground, make the LMV793/LMV794 ideal for applications requiring high speed and low power sensors.

LMV793/LMV794 is manufactured using the national advanced VIP50 process. The LMV793 is available in a 5-pin SOT23 or 8-pin SOIC package. The LMV794 is available as an 8-pin SOIC or an 8-pin MSOP.

 


apply

  • ADC interface
  • Photodiode amplifier
  • Active filters and buffers
  • Low noise signal processing
  • Medical instruments
  • Sensor interface applications

andLMV792MMXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LPV531MKX NXP 10+ TSOT-23-6 Programmable microCMOS input, rail-to-rail output op amp
LPV531MK NXP 10+ TSOT-6 Programmable microCMOS input, rail-to-rail output op amp
LMV796MFX NXP 11+ SOT23-5 17 MHz, low noise, CMOS input, 1.8V op amp
LMV797MMX NXP 10+ MSOP-8 17 MHz, low noise, CMOS input, 1.8V op amp
LMV791MK NXP 10+ SOT23-6 17 MHz, low noise, CMOS input, 1.8V off op amp
LMV792MM NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MFX NXP 10+ SOT23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MAX NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensated for the PowerWise ® series of operational amplifiers
LMV793MA NXP 10+ SOP8 88 MHz, low noise, 1.8V CMOS input, compensated for the operational amplification of the PowerWise ® series
LMV793MF NXP 11+ SOT-23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp

Popular searches


Model Manufacturers lot number encapsulation illustrate
DZ52-080Z300R024/OH Hartmann-Lammle 23+ module Hartmann-Lammle DZ52-080Z300R024/OH
1SVR040011R2500 ABB 2023+ converter Universal signal converter 110-240VAC 50/60Hz / 100-300VDC
EA12-NO-20-1-31-BD ROSS ENGINEERING 23+ Relays EA12-NO-20-1-31-BD High Voltage Relay
EA12-DT-20-1-31-BD ROSS ENGINEERING 2023+ module High voltage relays
ABCIRHSE06HC2214PCWF80 AB 2023 connector Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°） FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors

NXP brand product recommendation


Model Manufacturers lot number encapsulation illustrate
LMV792MM NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MFX NXP 10+ SOT23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MAX NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensated for the PowerWise ® series of operational amplifiers
LMV793MA NXP 10+ SOP8 88 MHz, low noise, 1.8V CMOS input, compensated for the operational amplification of the PowerWise ® series
LMV793MF NXP 11+ SOT-23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV794MMX NXP 10+ MSOP-8 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV861MGX NXP 08+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MGE NXP 10+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MG NXP 11+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV862MM NXP 10+ MSOP-8 Dual 30 MHz low-power CMOS, hardened operational amplifiers
DAC081C081CISDX NXP 10+ LLP 8-bit micropower digital-to-analog converter
DAC081C081CISD NXP 09+ LLP 8-bit micropower digital-to-analog converter
DAC081C081CIMK NXP 11+ SOT23-6 10-bit micropower digital-to-analog converter
DAC081C085CIMMX NXP 10+ MSOP8 10-bit micropower digital-to-analog converter
DAC081C085CIMM NXP 10+ MSOP8 10-bit micropower digital-to-analog converter
DAC081C081CIMKX NXP 11+ TSOT23-6 10-bit micropower digital-to-analog converter
DAC101S101QCMKX NXP 11+ TSOT23-6 10-bit micropower, RRO digital-to-analog converter
DAC101S101QCMK NXP 11+ TSOT23-6 12-bit micropower, digital-to-analog converter for RRO
DAC121C081CIMKX NXP 10+ TSOT23-6 12-bit digital-to-analog converter
DAC121C081CISD NXP 11+ 6-LLP 12-bit digital-to-analog converter

Categorical search

Copyright chip100.com © 2010-2011 MCCT粤ICP备14056028号

Related Links

wirewound resistor rectangular connector contacts crimping pliers term block hdr insulated terminals bus plug needle pusher cement resistance circular connectors ph connector