LMV716MM

• Product Introduction

 peculiarity

(Typical, V⁺=3.3V, TA₌25°C, unless otherwise specified).

illustrate

The LMV716 is a dual operational amplifier with two low voltage and low supply current, making it ideal for portable applications. LMV716 CMOS Input Stage Driver I _{have a bias}current down to 0.6 pA, which with a low noise voltage of 12.8 plus NV/NV makes the LMV716 perfect for applications requiring active filters, impedance amplifiers, and hard disk vibration cancellation circuitry.

With high noise sensitivity, small signal applications will benefit from a bandwidth of 5 MHz with a large gain, coupled with a minimum supply current of 1.6 mA and a slew rate of 5.8 V/μs.

The LMV716 provides a rail-to-rail output swing for heavy objects. The input common-mode voltage range includes ground, which is ideal for terrestrial remote sensing applications.

The LMV716 has a supply voltage that includes 2.7V to 5V and is available in an 8-pin MSOP package with a wide temperature range of -40°C to 85°C. This allows it to be placed next to the sensor in the LMV716 small package, thus reducing external noise pickup.

apply

• Active filters
• Impedance amplifier
• Audio preamps
• Hard disk vibration relief circuitry