DS22EV5110SQE

• Product Introduction

 peculiarity   Optimized for HDMI/DVI source and repeater applications Compatible with TMDS configuration, input receive equalization supports data rates up to 2.25 Gbps TMDS transmits deemphasis for compatible output configurations Reduced jitter delivery of dedicated CDRs on each data channel The resistive adjustable differential output voltage is extended for AC coupling over Class 5 and Category 6 applications Wide range of cable equalizer settings up to 2.25 Gbps The total output power of 2.25 Gbps is 0.09 UI jitter DVI 1.0 and HDMI v1.3a are compatible with TMDS source and receiver interfaces 7 mm x 7 mm 48-pin LLP package > 8 kV HBM ESD protected 0°C to +70°C operating temperature   illustrate DS22EV5110 is optimized for 6.75 Gbps (3 × 2.25 Gbps) with high-performance clock recovery function extended to EQ for DVI™ and HDMI™ cable extension applications. It supports 3 data channels with minimized transmission differential signaling ® (TMDS) and a single clock channel with data transfer rates up to 2.25 Gbps over DVI™v1.0, HDMI™v1.3a per data channel. The device integrates a configurable receive equalizer, clock and data recovery (CDR) circuitry and deemphasis driver for each data channel via DVI v1.0, and HDMI v1.3a data transfer rates up to 2.25 Gbps per data channel. The device integrates a configurable receive equalizer with clock and data recovery (CDR) circuitry on each data channel. This clock channel feeds into a high-perfromance phase-locked loop (PLL) to regenerate a low-jitter output clock data recovery, enabling the expansion of the capabilities of the driving repeater application. DS22EV5110 equalizes larger than 25m 28 gauge AWG HDMI cables, enabling 1080p resolution, 12-bit color depth (2.25 Gbps) with low-jitter clock and data signal output versions, reducing deterministic jitter and random jitter. Get a total jitter of 0.09 UI or above supported data transfer rate. This output jitter is extremely low on tight timing budgets, providing system designers with additional margin and flexibility. This is ideal for DVI and HDMI source and repeater applications. The transmitter supports transmit de-emphasis, so the output can be used to drive additional cable lengths or trace-optimized configurations for FR4.   apply Repeater application HDMI/DVI extension Source application Video card Blu-ray DVD player Game Application of the sink: High-definition displays Projector