LMP7717MAE

• Product Introduction

 peculiarity (Typical 5V supply, unless otherwise noted) Input offset voltage ± 150μV (max) Input reference voltage noise 5.8 NV / √ Hz Input bias current 100 FA Gain bandwidth accumulation 88 MHz Supply voltage range 1.8V to 5.5V Current supplied to each channel LMP7717 1.15 mA LMP7718 1.30 mA Rail-to-rail output swing @ 10kΩ load Railways from 25 mV @2kΩ load Railways from 45 mV Guaranteed 2.5V and 5.0V performance Total harmonic distortion 0.04% @ 1 kHz, 600Ω Temperature range -40°C to 125°C illustrate With a low noise of LMP7717 (single) and LMP7718 (dual), the CMOS input op amp provides a low input voltage noise density of 5.8 NV while consuming only 1.15 milliamps (LMP7717) of quiescent current. LMP7717/LMP7718 are products with a gain bandwidth (GBW) of stable gain of 10 and 88 MHz. The LMP7717/LMP7718 has a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. LMP7717/LMP7718 each has a rail-to-rail output stage. These amplifiers are part of LMP's high-precision amplifier family and are ideal for a variety of instrumentation applications. LMP7717 family provides optimal performance in low voltage and low noise systems. The CMOS input stage, typical input bias current in the range of a few femtosecond amps, and input common-mode voltage range, which includes ground, make LMP7717/LMP7718 ideal for applications that require high-speed, low-power sensors. LMP7717/LMP7718 is manufactured using the national advanced VIP50 process. LMP7717 is available in a 5-pin SOT - 23 or 8-pin SOIC package. LMP7718 is available in an 8-pin SOIC or an 8-pin MSOP.   apply ADC interface Photodiode amplifiers Active filters and buffers Low-noise signal processing Medical instruments Sensor interface applications