home page>Product Center> Operational amplifiers

Product images are for illustrative purposes only
Product details are welcome upon request

MAX4383

Category:Operational amplifiers
Product Name:Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
Manufacturers:MAXIM
Production Batch Number:12+
Encapsulation:TSSOP
Stock Status:There is stock
Stock Quantity:3000
Minimum order quantity: 1
Details:

Product introduction

The MAX4383 is an ultra-small, low-cost, 210MHz, single-supply, rail-to-rail output, and disabled op amp

description

The MAX4380-MAX4384 op amps are family, unity-gain stable devices that combine high-speed performance, rail-to-rail output, and high-impedance disable modes. These devices operate from a single +4.5 V to +11 V supply or dual ± 2.25 V ± 5.5 V supplies. The common-mode input voltage range extends beyond the negative rail (ground in single-supply applications).

The MAX4380-MAX4384 require simultaneous implementation of 1 for 210MHz-3dB bandwidth, 0.1dB gain flatness of 55MHz, and slew rate of 485V/μs with only 5.5 mA of quiescent supply current per op amp. These devices are in low-power/low-voltage systems that require wide bandwidth, such asVideo, communication, instrumentation, excellent solutions.

The MAX4380 with disable is available in an ultra-small 6-pin SC70 package.

Key features

Low cost and high speed:
- It is 210MHz-3dB bandwidth
- 0.1dB gain flatness at 55MHz
- 485V/μs slew rate
Disable mode where high impedance states are output
Single +4.5 V to +11 V operation
Rail-to-rail output
The input common-mode range is out of V_EE
Low differential gain/phase: 0.02%/0.08°
Low distortion at 5MHz
- -65dBc SFDR
- -63 dB total harmonic distortion
Ultra-small 6-pin SC70, 6-pin SOT23 package, 10-pin μMAX® package, 14-pin TSSOP and 20-pin TSSOP package

Application/Purpose

Mock-Digitizer interface
Battery-powered devices
CCD imaging system
Digital cameras
Stb
Surveillance video recording system
Video cable drive
Video routing and switching systems
Video on demand
chart

Typical operating circuit

andMAX4383Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
MAX4383	MAXIM	12+	TSSOP	Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4383ESD	MAXIM	05+	W.SO	Brand new original
MAX4383EUD	MAXIM	05+	W.SO	Brand new original
MAX4383EEE	MAXIM	05+	uMAX	Brand new original
MAX4383EUD+T	ANALOG	0806+	LQFP
TPS54383PWPR	TI	0940+	TSSOP14

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

MAXIM BRAND PRODUCT RECOMMENDATIONS

Model	Manufacturers	lot number	encapsulation	illustrate
MAX4382	MAXIM	12+	TSSOP	Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4381	MAXIM	12+	TSSOP	Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4380	MAXIM	12+	TSSOP	Ultra-small, low cost, 210MHz, single supply, rail-to-rail output and disable op amp
MAX4396	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4395	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4394	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4393	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4392	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4390	MAXIM	12+	SC70-6	Ultra-small, low cost, 85MHz rail-to-rail output and disable op amp
MAX4386E	MAXIM	12+	SOT23-5	Low-cost, 230MHz single/quad op amps with rail-to-rail output and ±15kV ESD protection
MAX4385E	MAXIM	12+	SOT23-5	Low-cost, 230MHz single/quad op amps with rail-to-rail output and ±15kV ESD protection
MAX4031E	MAXIM	11+	TSSOP	Low-cost, 144MHz, dual/triple op amps with ± 15kV ESD protection
MAX4030E	MAXIM	11+	TSSOP	Low-cost, 144MHz, dual/triple op amps with ± 15kV ESD protection
MAX9552	MAXIM	12+	SOT23	High current VCOM driver buffer for TFT LCD
MAX9551	MAXIM	12+	SOT23	High current VCOM driver buffer for TFT LCD
MAX9550	MAXIM	12+	SOT23	High current VCOM driver buffer for TFT LCD
MAX4550	MAXIM	12+	SOP	Serial control, dual 4X2. Click-free audio/video analog crosspoint switch
MAX4549	MAXIM	12+	SOP	Serial control, three sets of 3x2 audio/video crosspoint switches
MAX4548	MAXIM	12+	SOP	Serial control, three sets of 3x2 audio/video crosspoint switches
MAX4584	MAXIM	12+	SOP	Serial control audio/video switch/analog switch