LT1364

• Product introduction

LT1364双核和四达70MHz，1000V/μs运算放大器

peculiarity

apply

• Wideband AmplifiersWideband amplifiers
• Buffersbuffer
• Active FiltersActive filters
• Video and RF Amplification视频和射频放大
• Cable DriversCable driver
• Data Acquisition SystemsData acquisition system

• 70MHz Gain-Bandwidth70MHz gain bandwidth
• 1000V/µs Slew Rate1000V/μs摆率
• 7.5mA Maximum Supply Current per Amplifier每个放大器的电流7.5毫安最大供应
• Unity Gain StableUnity gain is stable
• C-Load™ Op Amp Drives All Capacitive Loads™运算放大器的C-负载驱动所有容性负载
• 9nV/ rt Hz Input Noise Voltage9nV / RT Hz输入噪声电压
• 1.5mV Maximum Input Offset Voltage1.5mV maximum input offset voltage
• 2µA Maximum Input Bias Current2μA maximum input bias current
• 350nA Maximum Input Offset Current350nA maximum input offset current
• 50mA Minimum Output Current50 mA minimum output current
• ±7.5V Minimum Output Swing into 150 ohms±7.5V最低为150欧姆的输出摆幅
• 4.5V/mV Minimum DC Gain, R_L=1k4.5V/mV minimum dc gain_，RL = 1K
• 50ns Settling Time to 0.1%, 10V Step50ns的建立时间至0.1％，10V步骤
• 0.06% Differential Gain, A_V=2, R_L=150 ohms微分增益，0.06％_targetV =_2，RL = 150 ohms
• 0.04° Differential Phase, A_V=2, R_L=150 ohms0.04°差分相位_targetV =_2，RL = 150 ohms
• Specified at ±2.5V, ±5V, and ±15VSpecify at ± 2.5V, ±5V, ±15V
• descriptionThe LT1364/LT1365 are dual and quad high speed operational amplifiers with outstanding AC and DC performance.LT1364/LT1365是双核和四高速运算放大器，具有出色的AC和DC性能。 The amplifiers feature much lower supply current and higher slew rate than devices with comparable bandwidth.该放大器具有低得多的电源电流和高于摆率相媲美的带宽的设备。 The circuit topology is a voltage feedback amplifier with matched high impedance inputs and the slewing performance of a current feedback amplifier.电路的拓扑结构是一个电压反馈放大器相匹配的高阻抗输入和电流反馈放大器的回转性能。 The high slew rate and single stage design provide excellent settling characteristics which make the circuit an ideal choice for data acquisition systems.高转换率和单级设计提供了良好的稳定特性，使电路数据采集系统的理想选择。 Each output drives a 150 Ohms load to ±7.5V with ±15V supplies and to ±3.4V on ±5V supplies.每个输出驱动150欧姆负载7.5V±15V电源±3.4V至±±5V电源。 The amplifiers are stable with any capacitive load making them useful in buffer or cable driving applications.放大器稳定的任何容性负载，使他们在缓冲区或电缆驱动的应用非常有用。 The LT1364/LT1365 are members of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation's advanced bipolar complementary processing.LT1364/LT1365是一个快速，高性能放大器使用这种独特的拓扑结构和采用凌特公司的先进的双极互补处理家庭成员。 For a single amplifier version of the LT1364/LT1365 see the LT1363 data sheet.For a single amplifier LT1364/LT1365 version, LT1363 datasheet. For 50MHz devices with 4mA supply currents see the LT1360 through LT1362 data sheets.对于50MHz的设备具有4mA电源电流通过的LT1360 LT1362数据表。 For lower supply current amplifiers see the LT1354 to LT1359 data sheets.对于较低的电源电流放大器看到LT1354 LT1359数据表。 Singles, duals, and quads of each amplifier are available.单打，对偶，每个放大器的四边形