LTC6084

• Product introduction

LTC6084Dual, 1.5MHz, rail-to-rail, CMOS amplifier

peculiarity

• Low Offset Voltage: 750μV Max
• Low Offset Drift: 5μV/°C Max
• Low input bias current:
  1pA (typical at 25°C)
  40pA (≤ 85℃)
• Rail-to-rail inputs and outputs
• 2.5V to 5.5V operating voltage range
• Gain-bandwidth product: 1.5MHz
• CMRR: 70dB (min)
• PSRR: 94dB (minimum)
• Supply Current: 110μA per amplifier
• Shutdown current: 1.1μA per amplifier
• Available in 8-pin MSOP and 10-pin DFN packages (LTC6084) and 16-pin SSOP and DFN packages (LTC6085)

• description

  LTC^®The 6084/LTC6085 are dual/quad, low cost, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifiers with 1pA input bias current.
  
  A gain bandwidth of 1.5MHz and a slew rate of 0.5V/μs, combined with a wide supply range and a low offset voltage of 0.75mV, make the LTC6084/LTC6085 suitable for a wide range of applications, from data acquisition to medical devices and consumer electronics. The 110μA supply current and shutdown mode are ideal for signal processing applications that require high performance and very low power.
  
  The LTC6084/LTC6085 feature an output stage that swings within 5mV of either supply rail to maximize signal dynamic range in low supply applications. The input common-mode range includes the entire supply voltage. These op amps are specified for 2.5V and 5V supply voltages and a temperature range of -40°C to 125°C. The dual amplifier LTC6084 is available in 8-lead MSOP and 10-lead DFN packages. The quad amplifier LTC6085 is available in a 16-lead SSOP and DFN package.

• apply

  • Portable test equipment
  • Medical equipment
  • Consumer electronics
  • Data acquisition