home page>Product Center> Instruments and equipment

Product images are for illustrative purposes only
Product details are welcome upon request

MAX1497

Category:Instruments and equipment
Product Name:.5- and 4.5-bit, monolithic LED driver and μC interface ADCs
Manufacturers:MAXIM
Production Batch Number:12+
Encapsulation:SOP
Stock Status:There is stock
Stock Quantity:30000
Minimum order quantity: 1
Details:

Product introduction

MAX1497

.5- and 4.5-bit, monolithic LED driver and μC interface ADCs

description

The MAX1497/MAX1499 low-power, 3.5- and 4.5-digital, analog-to-digital converters (ADCs) integrate light-emitting diode (LED) drivers that operate from a single 2.7V to 5.25V supply. They include internal references, a high-precision on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates a negative supply, which is required for an integrated input buffer that operates from a single supply. The ADC is configured for an input range of ±2V or ±200mV and an LED and/or microcontroller (μC) that outputs its conversion results. IT IS POSSIBLE FOR MICROCONTROLLERS TO COMMUNICATE VIA AN SPI™-/QSPI™-/MICROWIRE-COMPATIBLE™ SERIAL INTERFACE. The MAX1497 is a 3.5-bit (±1999 count) device, while the MAX1499 is a 4.5-bit (±19,999 count) device.

The MAX1497/MAX1499 do not require external precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required for dual-slope ADCs commonly used in panel instrumentation circuits.

The devices also feature on-chip buffers, differential signals, and reference inputs that allow direct interfacing with high impedance signal sources. In addition, they use continuous internal offset calibration and provide 100 dB rejection at 50Hz and 60Hz power supply noise. Other features include data hold, peak detection, overrange and underrange detection, and a user-programmable low battery monitor.

The MAX1499 is a 32-pin, 7mm x 7mm TQFP package with the MAX1497 available in 28-pin SSOP and 28-pin PDIP packages. All devices in this family operate over the extended temperature range of -40°C to +85°C.

Key features

High resolution
- MAX1499: 4.5-bit (±19,999 count)
- MAX1497: 3.5-bit (±1999 count)
Σ-ΔDC architecture
- There is no integrated capacitor
- There is no auto-zero capacitor
- > 100dB for both 50Hz and 60Hz rejection
Operate from a single 2.7V or 5.25V supply
Selectable input range± 200mV or ±2V
Selectable voltage reference: internal 2.048V or external
Internal high-precision oscillator eliminates the need for external components
Automatic offset calibration
Low power consumption (excluding LED drive current)
- Maximum operating current of 664μA
- 268μA maximum shutdown current
Small 32-pin, 7 mm x 7 mm TQFP package (4.5-bit), 28-pin SSOP package (3.5-bit)
Also available in PDIP package (3.5-bit)
Multiplexed LED driver resistors programmable segment current
SPI-/QSPI-/MICROWIRE-Compatible serial interface
Extended Temperature Range (-40°C to +85°C)

Application/Purpose

Digital multimeter
Digital panel table
Digital voltmeter
Handheld meters

andMAX1497Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
MAX1497	MAXIM	12+	SOP	.5- and 4.5-bit, monolithic LED driver and μC interface ADCs
LT1497CS	LINEAR	09+	SOP16	Dual 125 mA, 50MHz current feedback amplifiers

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
FG410	YOKOGAWA	23+	instrument	FG400 Isolated Arbitrary Waveform/Function Generator
FG400	YOKOGAWA	23+	instrument	FG400 Isolated Arbitrary Waveform/Function Generator
FG420	YOKOGAWA	23+	instrument	FG400 Isolated Arbitrary Waveform/Function Generator
12020043	Aptiv PLC	23+	connector	12020043 - Delphi Metri-Pack 280 12-Way Black Unsealed Female Connector with Mounting Flange
ABCIRP28M13G#	AB Connectors Ltd	23+	connector	Boots
ABCIRH03T2428PCXF80M32V0	AB Connectors Ltd	2023+	connector	Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
CIR030FP-16-10P-F80	ITT Interconnect Solutions	23+	connector	Veam CIR, Circular Connector
FRCIR030FP22-9P-F80	ITT Interconnect Solutions	23+	connector	Veam CIR, Circular Connector
207444-4	TE Connectivity	23+	Straight in	18 CONTACT(S), MALE, COMBINATION LINE CONNECTOR, SOLDER, PLUG
PCMD400110S24W-VT-KH-FLX	MTM POWER	2023+	module	DC/DC-Wandler 400 W
WEH000802ARPP5N00000	WINSTAR	23+	LCD	OLED CHARACTER 8X2 BLUE 1.2"
WEH000802ABPP5N00000	WINSTAR	23+	LCD	OLED CHARACTER 8X2 BLUE 1.2"
WEH000802ALPP5N00000	WINSTAR	23+	LCD	OLED CHARACTER 8X2 BLUE 1.2"
WEH000802ABPP5N00100	WINSTAR	23+	LCD	OLED CHARACTER 8X2 BLUE 1.2"
WEH000802ALPP5N00100	WINSTAR	23+	LCD	OLED CHARACTER 8X2 BLUE 1.2"
ABBP8KSKP80	AB	23+	Female needle	8% s pins
ABCIRHSE06T2410SCNF80M32V0	AB	23+	connector	Connector Set ABCIRH Series Connector Assemblies New Original Imported In Stock
ABCIRH03T2410PCNF80M32V0	AB	23+	connector	Connector Set ABCIRH Series Connector Assemblies New Original Imported In Stock
CIRH03T2410PCNF80M32V0	AB	23+	connector	Connector Set ABCIRH Series Connector Assemblies New Original Imported In Stock
ABBP8KPKP80	AB	2023+	DIP	8% s pins

MAXIM BRAND PRODUCT RECOMMENDATIONS

Model	Manufacturers	lot number	encapsulation	illustrate
MAX1495	MAXIM	2011+	32-LQFP	3.5- and 4.5-bit, monolithic LCD driver ADCs
MAX1491	MAXIM	2011+	32-LQFP	3.5- and 4.5-bit, monolithic LCD driver ADCs
MAX1493	MAXIM	2011+	32-LQFP	3.5- and 4.5-bit, monolithic LCD driver ADCs
MAX1498	MAXIM	12+	TSSOP-14	Low-power, 3.5 and 4.5 digital, analog-to-digital converters (ADCs) operate with integrated light-emitting diode (LED) drivers from a single 2.7V to 5.25V supply.
MAX1496	MAXIM	12+	TSSOP-14	Low-power, 3.5 and 4.5 digital, analog-to-digital converters (ADCs) operate with integrated light-emitting diode (LED) drivers from a single 2.7V to 5.25V supply.
MAX1447	MAXIM	12+	TSSOP-14	Low-power, 3.5 and 4.5 digital, analog-to-digital converters (ADCs) operate with integrated light-emitting diode (LED) drivers from a single 2.7V to 5.25V supply.
MAX1365	MAXIM	2010+	48-LQFP	Independent 4-20mA output, 4.5-/3.5-Digit panel meter
MAX1368	MAXIM	11+	QFP48	Interface of microcontroller, 4.5-/3.5-Digit panel meter 4-20mA output
MAX1366	MAXIM	11+	QFP48	Interface of microcontroller, 4.5-/3.5-Digit panel meter 4-20mA output
DS1993	MAXIM	12+	SOP16	memorizer
DS1992	MAXIM	12+	SOP16	memorizer
DS1985U	MAXIM	12+	BUTTON	1024-bit or 64kbits electrically programmable read-only memory (EPROM)
DS1982U	MAXIM	12+	BUTTON	1024-bit or 64kbits electrically programmable read-only memory (EPROM)
DS1411-009	MAXIM	12+	uds	A complex RS-232 1-Wire adapter and I-button holder perform RS-232 level translation and actively generate a 1-Wire® communication signal
DS1404	MAXIM	12+	switch	Touch and hold the cradle of the probe cable
DS9100C	MAXIM	12+	usd	Touch and hold the probe stamping
DS9100B	MAXIM	12+	usd	Touch and hold the probe stamping
DS9100A	MAXIM	12+	usd	Touch and hold the probe stamping
DS9490R	MAXIM	12+	USB	USB 1-Wire/I button adapter
DS1402D-41	MAXIM	11+	SOP	iButton probe blue dot assembly