MPC17510EJ

• Product Introduction

MPC17510EJ 0.45 ohms (typical), 1.2 A/15 V, H-bridge motor drive

The MPC17510 is a monolithic circuit H-bridge and is ideal for portable electronic applications to control small brush DC motors, such as: Digital cameras and single-lens cameras.
MPC17510 is an enable and tri-state bridge control MCU with a 2 V to 15 V H-bridge motor driverVia parallel interface (compatible with 5 V logic). The IC has a low on-resistance of 0.55 ohms (max) and a driver controllablePWM-ED at 200 kHz. The device contains an integrated charge pump and level shifter (for the gate drive voltage), except: Comprehensive through-current protection and undervoltage circuit detector to avoid failures. ,,MPC17510 can control 4 output modes: forward, reverse, brake, Tri-State (Open).
-------------------------------------------------- ------------------------------
peculiarity
-------------------------------------------------- ------------------------------
Motor power supply 15 V operation
Low RDS(ON) 0.45 ohms (typical).
The output current is 1 A (DC), 3 A (peak).
Through-current protection circuit
PWM controls the input frequency of 200 kHz

Microchip Centennial Electronic Technology - Professional sensor expert