home page>Product Center> Operational amplifiers

Product images are for illustrative purposes only
Product details are welcome upon request

MCP6031T-E/MC

Category:Operational amplifiers
Product Name:The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
Manufacturers:Microchip
Production Batch Number:12+
Encapsulation:SMD/SMT
Stock Status:There is stock
Stock Quantity:3000
Minimum order quantity: 1
Details:

Product introduction

MCP6031T-E/MCMCP6031Operational amplifiers（Op amp）The gain bandwidth of is 10 kHzof low typicalOperating current900 nAAn offset voltage，beLess than 150Microvolts。 MCP6031adoptfinishMicrochip is advancedCMOSTechnology, offeredLow bias current,high speed，highOpen-loop gaintargetrailto the railInput and output swings。 MCP6031Single power supplyVoltage canAs low as 1.8V，whereasLess than1Microampsquiescent current。beatStandard 8-pinSOIC，MSOP，SOT-23 and 2x3 DFN packagetargetMCP6031。

characteristic
Rail-to-Rail Input and Output Unity gain stable Low operating voltage Low quiescent current Low offset voltage Wide Power Supply Voltage: 1.8V to 5.5V

Microchip Centennial Electronic Technology - Professionalsensorexpert

characteristic
Rail-to-Rail Input and Output Unity gain stable Low operating voltage Low quiescent current Low offset voltage Wide Power Supply Voltage: 1.8V to 5.5V Gain Bandwidth Product: 10 kHz (typical) No Phase Reversal

andMCP6031T-E/MCRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
MCP6031T-E/SN	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/OT	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/MS	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/MC	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be

Model	Manufacturers	lot number	encapsulation	illustrate
DZ52-080Z300R024/OH	Hartmann-Lammle	23+	module	Hartmann-Lammle DZ52-080Z300R024/OH
1SVR040011R2500	ABB	2023+	converter	Universal signal converter 110-240VAC 50/60Hz / 100-300VDC
EA12-NO-20-1-31-BD	ROSS ENGINEERING	23+	Relays	EA12-NO-20-1-31-BD High Voltage Relay
EA12-DT-20-1-31-BD	ROSS ENGINEERING	2023+	module	High voltage relays
ABCIRHSE06HC2214PCWF80	AB	2023	connector	Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN	Alliance Memory Inc	23+	SOJ-36	AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE	ASAHI KEIKI	2023+	weld	Temperature sensor
V23154D735B110	TE	2023+	Relays	Low Signal Relay - PCB V23154D 735B110
V23154D735F104	TE	23+	Relays	Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20	SCHMERSAL	2023+	switch	Safety gate switch
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR	Honeywell	10+11+	SMD	RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors

Microchip brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
MCP6031-E/SN	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031-E/MS	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031-E/MC	Microchip	12+	SMD/SMT	The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6444T-E/ST	Microchip	12+	SMD/SMT	The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444T-E/SL	Microchip	12+	SMD/SMT	The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/ST	Microchip	12+	SMD/SMT	The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/SL	Microchip	12+	SMD/SMT	The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6442T-E/MNY	Microchip	12+	SMD/SMT	The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/SN	Microchip	12+	SMD/SMT	The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/MS	Microchip	12+	SMD/SMT	The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/SN	Microchip	12+	SMD/SMT	The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/MS	Microchip	12+	SMD/SMT	The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6441T-E/OT	Microchip	12+	SMD/SMT	The MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-based applications
MCP6441T-E/LT	Microchip	12+	SMD/SMT	The MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-based applications
MCP6561	MICROCHIP	11+	SOT23-5	Comparator with 1.8V low power push-pull output
PIC16F684-E/SL	Microchip	11+	SOP-14	14-pin flash memory based on 8-bit CMOS microcontroller with Nanowatt technology
PIC24FJ64GA004	MICROCHIP	11+	QFN44	44-pin, 32KB, flash
PIC16F716-I/SO	MICROCHIP	12+	SOP-18	8-bit flash microcontroller with A/D converter and enhanced capture/comparison/PWM
dsPIC33FJ256GP510A-I/PT	Microchip	11+	QFP100	Undervoltage detection/reset
PIC16F873A-I/SP	MICROCHIP	2011+	DIP28	Microcontroller microcontroller

MCP6031T-E/MC

andMCP6031T-E/MCRelated ICs are:

Popular searches

Microchip brand product recommendation

Categorical search

Related Links