The ADP2386 is oneSynchronous step-down DC-DC regulatorA 44 mΩ high-end power MOSFET and an 11 mΩ synchronous rectifier MOSFET are integrated in a compact 4 mm × 4 mm LFCSP package for an efficient solution. The device uses a peak current mode, constant frequency pulse-width modulation (PWM) control scheme with excellent stability and transient response. The switching frequency of the ADP2386 is programmable from 200 kHz to 1.4 MHz. To minimize system noise, the synchronization function allows the switching frequency to be synchronized to an external clock.
The ADP2386 requires very few external components and has an input voltage range of 4.5 V to 20 V. The output voltage is adjustable from 0.6 V to 90% of the input voltage, delivering up to 6 A of continuous current. Each IC draws less than 110 μA from the input source when disabled.
This regulator targets high-performance applications that require high efficiency and design flexibility. External compensation and adjustable soft-start provide design flexibility. The power good output and precision enable input provide simple and reliable power sequencing.
Other important features include undervoltage lockout (UVLO), overvoltage protection (OVP), overcurrent protection (OCP), short-circuit protection (SCP), and thermal shutdown (TSD).
The ADP2386 operates over the junction temperature range of -40°C to +125°C and is available in 24-lead 4 mm × 4 mm LFCSP packages.
apply
- Communications infrastructure
- Networks and servers
- Industrial and instrumentation
- Healthcare
- Intermediate power rail conversion
- DC-DC point-of-load applications
-
Advantages and features
- Input voltage: 4.5 V to 20 V
- Integrated MOSFET: 44 mΩ/11 mΩ
- Reference voltage: 0.6 V ±1%
- Continuous output current: 6 A
- Programmable switching frequency: 200 kHz to 1.4 MHz
- Synchronization to external clock: 200 kHz to 1.4 MHz
- 180° inverting clock synchronization
- Precision enable and power good indication
- External compensation
- Internal soft-start with externally adjustable options
- Enter the precharge output after startup
- ADIsimPower design tool support
field
Building technology
//www.chip100.com/