AD5643RBRMZ-5

The AD5623R/AD5643R/AD5663R are allnanoThe DAC® family is a low-power, dual, 12-/14-, 16-bit buffered voltage outputDigital-to-analog converters(DAC), which operates from a single 2.7 V to 5.5 V supply and is designed to be monotonic.

Each device has an on-chip reference. The AD5623R-3/AD5643R-3/AD5663R-3 contain a 1.25 V, 5 ppm/°C reference with a full-scale output of 2.5 V; The AD5623R-5/AD5643R-5/AD5663R-5 contain a 2.5 V, 5 ppm/°C reference with a full-scale output of 5 V. At power-up, the on-chip reference is turned off, allowing the use of an external reference. All devices operate from a single 2.7 V to 5.5 V supply. Writing to the DAC turns on the internal reference.

Each device contains a power-on reset circuit that ensures that the DAC output powers up to 0 V and remains at that level until a valid write operation is performed. It also features a shutdown feature that reduces the device's power consumption to 480 nA at 5 V in shutdown mode and provides a software-selectable output load.

In normal operation, the device features low power consumption, making it ideal for portable battery-powered devices.

THE AD5623R/AD5643R/AD5663R FEATURE A VERSATILE 3-WIRE SERIAL INTERFACE CAPABLE OF OPERATING AT CLOCK RATES UP TO 50 UMHz and are compatible with standard spi, qspi,®™ microwire™, and dsp interfaces. It includes an on-chip precision output amplifier that enables rail-to-rail output swing.

Product features
1. Dual, 12/14/16-bit DACs.
2. 1.25 V/2.5 V, 5 ppm/ºC on-chip reference.
3. Available in 10-pin MSOP and 3 mm × 3 mm, 10-pin LFCSP packages.
4. Low power consumption: 0.6 mW typical at 3 V and 1.25 mW at 5 V.
5. Settling time (max) of the AD5623R: 4.5 μs.

apply