MS310-100K-1% is a series of power thin-film resistors with a wide resistance range and a maximum temperature of +275°C
MS315-1.00M-1%
MS151- 124-1%
MS310-100-1%
MS310-300-1%
MS223-442-1%
MS151-3.16K-1%
MS220-100-1%
MS221-510R-1%
MS310-10K-1%
MS220-78.7-1%
MS310-500K-1%
MS260-680K-5%
MS310-10.0K-5%
MS260-680K-2%
MS221- 1.00M-1%
MS313-30.0M-5%
MS223-383K-1%
MS210-45.0-1%
MS151-200K-1%
MS221-250-1%
MS176-5.11K-1%
MS313-200K-1%
MS244-1.00M-1%
MS310-20.0M-1%
MS220-6.8K-1%
MS220-1K-1%
MS310-1.89M-1%
MS315- 100-1%
MS310-100K-1%
MS310-167K-1%
MS310-455K-1%
MS176-1.00K-1%
MS310-2.00K-1%
MS310-250K-1%
MS310-10.0M-1%
MS313-500-1%
MS260-6.8K-1%
MS220-4.00M-0.1%
MS220-16.5K-0.1%
MS313-15.0K-2%
MS322-25.0K-0.1%
MS220-2.00K-0.1%
MS322-10.0K-0.1%
MS220-55.0K-1%
MS220-73.0K-1%
MS313-390-1%
MS315-50.0K-1%
MS244-200K-1%
MS313-1.00M-1%
MS221-100K-1%
MS221-49.9K-1%
MS220-2.00K-1%
MS310-200K-1%
MS126-249K-0.1%
MS220-120-1%
MS126-9.09K-0.1%
MS-221-82R5
MS281-680-1%
MS310- 1M-1%
MS151-10.0K-5%
MS221-27.0K-1%
MS126-2.00K-5%
MS221-274-1%
MS315-100K-1%
MS151-100-1%
MS220-8.20M-1%
MS260-500K-1%
MS281-125K-1%
MS315-47K-1%
MS310-2.00M-1%
MS214-150K-1%
MS220- 3.50K-1%
MS220-14.0K-1%
MS220-750K-1% power rating is 22 watts, rated voltage is
Axial lead resistance values up to 6000 volts
30 megohm, MS type power thin film resistor
Simplify the performance of the circuit
Design and reduce equipment cost and complexity.
MS type power thin film resistors have
Single resistor:
• Full power and voltage ratings with no derating:
-No inductive performance.
- For high resistance values that extend the critical value
The resistance value is up to 10 times.
• Higher voltage ratings, not limited by minimum values
Wire size and spacing.
• Excellent long-term stability.
Tests have shown a typical stability of 0.05%/1000
A few hours of extended life.
Micronox® resistive film
MS-type performance starts with Caddock's Micronox®
Resistive film. Exclusively produced by Caddock
Electronics, these proven composite oxide films
Reliably used in Caddock's precision power supplies for over 30 years
Resistor products.
Micronox® resistive film is fired directly in
Ceramic cores with temperatures above 1400°F (760°C). these
The resistive film exhibits excellent stability
Thermal shock when exposed to high ambient temperatures
and high power density.
This unique precision power resistor approach
New design possibilities are realized by providing greater resistance
range, precise temperature characteristics and higher
Temperature and power handling capability