A1104LLHLX-T

• Product Introduction

The Allegro® A1101-A1104 and A1106 Hall-effect switches are next-generation replacements for the popular Allegro 312x and 314x series of single-pole switches. The A110x series is produced using BiCMOS technology, and the associated devices have the advantages of fast power-up and low operating noise. Device programming occurs after the package, eliminating offsets caused by package stress, ensuring higher switchpoint accuracy. The unique Hall element geometry and low offset amplifier help reduce noise and reduce residual offset voltages typically caused by device overmolding, temperature surges, and thermal stress.

The A1101-A1104 and A1106 Hall-effect switches contain the following components in a single silicon: a voltage regulator, a Hall voltage generator, a small signal amplifier, a Schmitt trigger, and an NMOS output transistor. The integrated voltage regulator allows operation between 3.8 and 24 V. The extended on-board protection circuitry enables an absolute maximum voltage rating of ±30 V, providing superior protection for automotive and industrial motor rectification applications without the need for additional external components. All devices in the series differ in no way except at the level of the magnetic switching points.

The small and refined geometry of the BiCMOS process allows these devices to be available in ultra-small packages. Available package types provide magnetically optimized solutions for most applications. The package LH is a SOT23W miniature low-thickness surface-mount package, while the package UA is a three-pin ultra-miniature SIP for via mounting. All packages are lead-free, and the pin frames are 100% matte tin plated.

• 连续工作
  • 快速上电
  • 低噪音
• 在整个工作温度范围内稳定运行
• 电池反接保护
• 高可靠性
• 线编程使其具有最佳性能
• 可靠的 EMC 性能
• 高 ESD 保护额定值
• 无旁路电容的稳压器稳定性
//www.chip100.com/