A1160LLHLX-T

• Product Introduction

A1160 是一款带外部启动诊断功能的Single-pole Hall-effect switches。在正常工作模式下，A1160 可用作标准单极霍尔效应开关。若存在足够的磁场（>B_OP（最大）），输出晶体管将启动（输出信号切换到低位）。此外，若撤消磁场（RP（最小）），A1160 开关的输出晶体管将关闭（输出信号切换到高位）。

The A1160 has a conductive coil that is close to the Hall element. When the diagnostic function is activated, these coils are energized. The energized coil generates an internal magnetic field that can be sensed by the Hall element. When diagnosing mode, the A1160 provides a square wave output, which confirms that the IC is correctly sensing the magnetic field generated inside. The diagnostic mode operates the entire electromagnetic signal path inside the IC, fully confirming its functionality. Therefore, for safety-critical applications that require redundant sensors (e.g., drive-by-wire systems), the A1160 does not require redundant sensors to increase the robustness of the application.

The A1160 Hall-effect sensor IC is extremely stable and compressive at a wide range of temperatures, especially for applications up to 150°C. Advanced dynamic offset cancellation technology ensures good performance at high temperatures, reducing residual offset voltages typically caused by device overmolding, temperature dependence, and thermal stress. The device houses the following components on a single silicon: a voltage regulator, a Hall voltage generator, a small signal amplifier, a chopper stabilizer, a Schmidt trigger, and an open-collector output that can draw up to 25 mA. The on-board regulator allows operation with a supply voltage of 3.8 to 24 V.

The A1160 is available in a 5-pin SOT23W package. The package is lead-free and features a 100% matte tin-plated pinframe.

• 单极开关点
• 外部启动诊断功能
• 诊断功能可在 IC 的整个电磁信号路径内运行
• 可承受物理应力
• 通过先进的稳定斩波技术实现超卓的温度稳定性
• 输出短路保护
• 拥有内部稳压器，可通过不规则电源启动
• 电池反接保护
• 固态可靠性
• 小型表面安装封装