A5303SLE-T

• Product Introduction

The A5303 is a low-current BiCMOS photosmoke detector with ultra-low standby current that can be operated on inexpensive batteries for up to 10 years. The device can be used in conjunction with an infrared light chamber to sense light emitted by smoke particles. The networking feature allows devices to be interconnected, and when any device detects smoke, all devices can send out an audible alarm. Special features are also integrated into the design to facilitate the collaborative operation and testing of the finished detector.

The variable gain optical amplifier interacts directly with the IR emitter-detector pair. The amplifier gain level is determined by two external capacitors and is selected internally based on the operating mode. Select Low Gain in Standby and Timer modes. When a local alarm occurs, this low gain will be (internally) increased by about 45% to provide a lag. High gain is used when the light chamber sensitivity is regularly monitored during key tests or standby mode. The built-in oscillator and timing circuitry ensures that only 100 μs of smoke is detected every 10 seconds, significantly reducing standby power consumption. In addition, a special third-order acceleration sensing scheme is integrated to shorten the time it takes to issue an audible alarm while reducing false triggering. The optical chamber sensitivity is monitored periodically and a warning signal is issued when there are two consecutive cycles of sensitivity drop.

A5303 采用超薄 (

• 超低的平均待机电流实现长达 10 年的电池寿命
• 2.3 至 5.5 V 工作电压范围
• 互连选项
• 逻辑输出控制外置声音 IC
• 电池电量不足检测与警告
• 光室灵敏度测试与警告
• 三重号角芯片判别光室警告
• 通电复位 (POR)
• 输入/输出的数字过滤器可提供超卓的抗扰度
• 计时器（沉默）模式用于启动降低灵敏度期间
• 内置电路减少错误触发
• 为所有管脚提供 ESD 保护电路
• 瞬时号角模式，符合 UL217、NFPA72 和 ISO8201 标准
• 锁存告警指示灯识别触发告警的器件