AD5601BCPZ-RL7

The AD5601/AD5611/AD5621 are nanoDAC® families that are single-channel, 8/10/12-bit, buffered output DACs that operate from a single 2.7 V to 5.5 V supply with a typical power consumption of 75 μA at 5 V in a small LFCSP and SC70 package. These devices have built-in on-chip precision output amplifiers that enable rail-to-rail output swing. The AD5601/AD5611/AD5621 feature a versatile three-wire serial interface that can operate at clock rates up to 30 MHz and is compatible with SPI, QSPI™, MICROWIRE™, and DSP interface standards.

All three devices have the widest dynamic output range due to their voltage references from the mains input. Each of these devices has a built-in power-on reset circuit that ensures that the DAC output is powered up to 0 V and maintained at that level until a valid write operation is performed on the device.

It also features power savings, reducing the device's typical power consumption to 0.2 μA at 3 V in power-saving mode and providing a software-selectable output load. Shutdown mode can be entered through the serial interface.

In normal operating mode, these devices have low power consumption, making them ideal for portable battery-powered devices. These nanoDAC devices combine a small package with low power consumption, making them particularly suitable for level setting requirements, such as bias generation or control voltage in space-constrained, power-sensitive applications.

Product features:

1. 提供6引脚LFCSP和SC70两种封装。
2. 低功耗、单电源供电。AD5601/AD5611/AD5621采用2.7 V至5.5 V单电源供电，最大功耗为100 μA，非常适合电池供电的应用。
3. 利用片内输出缓冲放大器，DAC能够提供轨到轨输出摆幅，典型压摆率为0.5 V/μs。
4. 基准电压从电源获得。
5. 高速串行接口，时钟速率最高达30 MHz。专为极低功耗应用设计。接口仅在写周期期间上电。
6. 关断功能。当关断时，该DAC在3 V下的典型上电复位电流为0.2 μA，具有掉电检测功能。

apply