AD7294BSUZ 12-bit monitoring and control system with integrated multi-channel ADC, DAC, temperature sensor, and current sensing function
The AD7294 is a single-chip solution that combines all the common features needed for current, voltage, and temperature monitoring and control. The device includes a low-voltage (±200 mV) analog input sense amplifier for shunt resistor-current monitoring, a temperature sense input, and four non-dedicated analog input channels that are multiplexed to a SAR analog-to-digital converter (ADC) with a 3μs conversion time. Both the digital-to-analog converter (DAC) and ADC are driven by a high-precision internal reference voltage. Four 12-bit DACs provide the required outputs for voltage control. The AD7294 also includes boundary registers for alarm functions. The device is designed based on ADI's high-voltage DMOS process and meets its high voltage requirements: 59.4V current-sense input and DAC output voltage up to 15V.
The AD7294 is a highly integrated solution that includes all the features needed to precisely control power amplifiers in cellular base station applications. In these applications, DACs provide 12-bit resolution to control the bias current of power transistors; At the same time, a thermal diode-based temperature sensor is integrated to compensate for temperature effects; ADCs monitor high-end current and temperature; All of these features are integrated into the device in a 64-pin TQFP package with an operating temperature of -40°C to +105°C.
apply
GSM、EDGE、UMTS、CDMA、TD-SCDMA、W-CDMA、WiMAX
- 点对多点及其它射频传输系统
- 12 V、24 V、48 V车载应用
- 工业控制
- 2.5 V内部参考电压
- 双线快速模式I2C接口
- 温度范围:−40°C至+105°C
- 封装:64引脚TQFP
12-bit SAR ADC with 3μs conversion time
- 4个非专用模拟输入
差分/单端
VREF,2×VREF输入范围
- 2个高端电流检测输入
工作电压范围:5 V至59.4 V
最大增益误差:0.5%
输入范围:±200 mV
- 2个外部二极管温度传感器输入
测量范围:−55°C 至+150°C
精度:± 2°C
串联电阻抵消
- 1个内部温度传感器
精度:±2°C
- 内置监控功能
每个通道均配有最小/最大记录器
可编程提醒阈值
可编程迟滞
- 四个12位单调15 V DAC
范围:5 V,0 V至10 V偏置
建立时间:8µs
吸电流与源电流:10 mA
上电复位(POR)至0 V