AD7352BRUZ

The AD7352 is a dual, 12-bit, high speed, low powerSuccessive approximation ADCoperates from a single 2.5 V supply with throughput rates up to 3 MSPS. The device contains two ADCs, each preceded by a low noise, wide bandwidth track-and-hold circuit that can handle input frequencies above 110 MHz.

Both the conversion process and the data acquisition process use standard control inputs and can be easily interfaced with microprocessors or DSPs. The input signal is in.CS; is sampled while the conversion begins here. The conversion time is determined by the SCLK frequency.

The AD7352 uses advanced design techniques to achieve very low power consumption at high throughput rates. It operates from a 2.5 V supply, has a throughput rate of 3 MSPS, and typically consumes 10 mA. The device also offers flexible power and throughput management options.

The analog input range is differential common-mode ±V_REF /2。 The AD7352 has an internal 2.048 V reference, or an external reference can be used. The AD7352 is available in a 16-lead ultrathin compact package (TSSOP).

Sample & Purchase

Product Focus
 

1. Features the functionality of two complete ADCs.
   Simultaneous sampling and conversion of two channels can be achieved. The conversion results of two channels can be obtained simultaneously by independent data lines or, if only one serial port is available, sequentially over one data line.
2. High throughput, low power consumption.
   The AD7352 provides a throughput rate of 3 MSPS and consumes 26 mW.
3. No conversion delays.
   The AD7352 uses two standard successive approximation ADCs to pass.CSInput and one-time conversion control enables precise control of sampling time.

apply

 

• Data acquisition system
• Motion control
• I/Q demodulation