AD9528BCPZ-REEL7
Product images are for illustrative purposes only
Product details are welcome upon request

AD9528BCPZ-REEL7

  • Category:Clock chip
  • Product Name:A JESD204B clock generator with 14 LVDS/HSTL outputs
  • Manufacturers:AD
  • Production Batch Number:14+
  • Encapsulation:72 ld LFCSP
  • Stock Status:There is stock
  • Stock Quantity:2330
  • Minimum order quantity: 1
  • Details:Click here to find pdf documentation for the AD9528BCPZ-REEL7
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

Advantages and features

  • 14 outputs, configurable as HSTL or LVDS
  • Maximum output frequency:
    2 outputs up to 1.25 GHz
    12 outputs up to 1 GHz
  • Depending on the voltage controlled crystal oscillator (VCXO) frequency accuracy (start-up frequency accuracy:
  • A dedicated 8-bit divider is provided for each output
    Coarse delay: 63 steps half the output frequency of the RF VCO divider, independent of jitter
    Fine-tuning delay: 15 steps with a resolution of 31 ps

  • Typical output-to-output skew: 20 ps
  • Duty cycle correction is provided for odd divider settings
  • Output 12 and output 13, VCXO output at power-up
  • Absolute output jitter: S(at 122.88 MHz)
    Integration range: 12 kHz to 20 MHz
  • For more features, please refer to the data sheet
  • Product details

    AD9528is a two-stage PLL with integrated JESD204B SYSREFgenerator, which can be used for multi-device synchronization. The first stage of the phase-locked loop (PLL1) enables input reference conditioning by reducing jitter of the system clock. The second stage PLL (PLL2) provides a high-frequency clock for lower integral jitter from the clock output driver and lower wideband noise. The external VCXO provides the low noise reference voltage required by PLL2 to meet demanding phase noise and jitter requirements for acceptable performance. The on-chip VCO is tuned over a frequency range of 3.450 GHz to 4.025 GHz. The integrated SYSREF generator outputs single, N, or continuous signals and synchronizes with the PLL1 and PLL2 outputs to align the time of multiple devices.

    The AD9528 generates two outputs (output 1 and 2) up to 1.25 GHz and 12 outputs up to 1 GHz, each configured to output directly from PLL1, PLL2, or the internal SYSREF generator. Each of the 14 output channels contains a divider with digital phase coarse tuning and an analog trimmed phase delay block, allowing all 14 outputs to have a high degree of flexibility in timing alignment. The AD9528 can also be used as a flexible dual input buffer to distribute 14 device clocks and/or SYSREF signals. At power-up, the AD9528 sends VCXO signals directly to outputs 12 and 13 to serve as power-up ready clocks.

    Note Throughout the data sheet, dual-function pin names refer to the applicable relevant function.

    apply

    • High-performance wireless transceivers
    • LTE and multicarrier GSM base stations
    • Wireless and broadband infrastructure
    • Medical instruments
    • Provide clocks for high-speed ADC, DAC, DDS, DDC, DUC, MxFE; JESD204B is supported
    • Low jitter, low phase noise clock distribution
    • Automated Test Equipment (ATE) and high-performance instrumentation

andAD9528BCPZ-REEL7Related ICs are:


Model Manufacturers lot number encapsulation illustrate
AD9528BCPZ-REEL7 AD 14+ 72 ld LFCSP A JESD204B clock generator with 14 LVDS/HSTL outputs
AD9528BCPZ AD 14+ 72 ld LFCSP A JESD204B clock generator with 14 LVDS/HSTL outputs

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

AD brand product recommendation


Model Manufacturers lot number encapsulation illustrate
AD9528BCPZ AD 14+ 72 ld LFCSP A JESD204B clock generator with 14 LVDS/HSTL outputs
AD580UH/883B AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
AD580UH AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
AD580TH AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
AD580LH AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
AD580KH AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
5962-8686103XA AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
5962-8686102XA AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
5962-8686101XA AD 14+ 3 ld TO-52 High accuracy 2.5 V IC reference
REF01HZ AD 14+ 8 ld Header +10 V precision reference
REF01HPZ AD 14+ 8 ld Header +10 V precision reference
REF01CSZ-REEL7 AD 14+ 8 ld Header +10 V precision reference
REF01CSZ-REEL AD 14+ 8 ld Header +10 V precision reference
REF01CPZ AD 14+ 8 ld Header +10 V precision reference
REF01CJ AD 14+ 8 ld Header +10 V precision reference
REF01AJ/883C AD 14+ 8 ld Header +10 V precision reference
REF02Z AD 14+ 8 ld PDIP +5 V precision reference/temperature sensor
REF02RC/883C AD 14+ 8 ld PDIP +5 V precision reference/temperature sensor
REF02NBC-002C AD 14+ 8 ld PDIP +5 V precision reference/temperature sensor
REF02HPZ AD 14+ 8 ld PDIP +5 V precision reference/temperature sensor

Categorical search