home page>Product Center> ADC analog-to-digital converter
ADC081S101CIMFX
Product images are for illustrative purposes only
Product details are welcome upon request

ADC081S101CIMFX

  • Category:ADC analog-to-digital converter
  • Product Name:8-bit micropower quad digital-to-analog converter
  • Manufacturers:NSC
  • Production Batch Number:10+
  • Encapsulation:SOT23-6
  • Stock Status:There is stock
  • Stock Quantity:5000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the ADC081S101CIMFX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

peculiarity

  • Guaranteed monotony
  • Low-power operation
  • Rail-to-rail voltage output
  • Power-on reset to 0V
  • Output updates at the same time
  • Wide supply voltage range (2.7 V to +5.5 V)
  • Industry's smallest package
  • Power-down mode

illustrate

The DAC084S085 is a full-featured, universal quad, 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5V supply, consuming 2.5 MW and 1.1 MW at 3V and 5V. The DAC084S085 is a package, 10-pin LLP and MSOP package. The 10-pin LLP package makes the DAC084S085 the smallest quad DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and a three-wire serial interface clock frequency up to 40 MHz over the entire supply voltage range. Competitive devices have limited clock rates of 25 MHz with supply voltages ranging from 2.7 V to 3.6 V. SERIAL INTERFACES COMPATIBLE WITH STANDARD SPI, QSPI, MICROWIRE AND DSP INTERFACES.

The reference for the DAC084S085 provides all four channels and can change the voltage by 1VandV one, providing as much output dynamic range as possible. The DAC084S085 has a 16-bit input shift register that controls the output, operating mode, power-down condition, and binary input data to be updated. All four outputs, which can be updated simultaneously or individually, depend on the operating bit settings for both modes.

Power-on reset circuitry ensures that the DAC output power is up to zero volts and persists until there is a valid write device. The power-down feature reduces the power consumption ratio below the microwatt with three different terminal options.

The low power consumption and small package of the DAC084S085 make it an excellent choice for battery-powered devices.

The DAC084S085 is a pin-compatible DAC that includes the 10-bit DAC104S085 and 12-bit DAC124S085 families. The DAC084S085 operates over the extended industrial temperature range of -40°C to +105°C.

Main specifications

resolution

8 bits

Integral Nonlinearity (INL)

± 0.5 LSB (maximum)

DNL

0.18 / -0.13 LSB (max)

Settling time

4.5 μs (max.)

Zero code errors

15 mV (max.)

Full-scale error

-0.75%FS (max.)

Power supply

normal

1.1 megawatt (3V) / 2.5 megawatt (5V) typical

Power down

0.3μW (3V) / 0.8μW (5V) typical


apply

  • Battery-powered instrument
  • Digital gain and offset adjustment
  • Programmable voltage and current sources
  • Programmable attenuator

andADC081S101CIMFXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LM4051AIM3-ADJ NSC 10+ SOT-23 Precision micropower parallel voltage
ADC081S021CISDX NSC 09+ LLP-6 Single-channel, 50 to 200 ksps, 8-bit A/D converter
ADC081S021CISD NSC 10+ 6-LLP Single-channel, 50 to 200 ksps, 8-bit A/D converter
ADC081S021CIMFX NSC 10+ SOT23-6 Single-channel, 50 to 200 ksps, 8-bit A/D converter
ADC081S101CISDX NSC 09+ LLP-6 8-bit micropower quad digital-to-analog converter
ADC081S101CISD NSC 10+ 6-LLP 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S051CIMMX NSC 10+ MSOP10 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S101CIMMX NSC 10+ SOP-10 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S101CIMM NSC 10+ 8-MSOP 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
LM3102MH NSC 10+ TSSOP-20 1MHz 0.75A buck regulator

Popular searches


Model Manufacturers lot number encapsulation illustrate
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62 ABB 2016+ Contactors 4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62
62EM1-00001 Microchip 2023+ Development board AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D212-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R5M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D112-R Omron 2023+ sensor Standard Proximity Sensor
AF16ZB-30-10RT-23 ABB 2023+ Contactors Contactor 48-130V50/60HZ-DC Contactor

NSC brand product recommendation


Model Manufacturers lot number encapsulation illustrate
ADC081S101CISD NSC 10+ 6-LLP 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S051CIMMX NSC 10+ MSOP10 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S101CIMMX NSC 10+ SOP-10 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
ADC104S101CIMM NSC 10+ 8-MSOP 4-channel, 200 ksps 10-bit A/D conversion for the 50 ksps PowerWise ® series
LM3102MH NSC 10+ TSSOP-20 1MHz 0.75A buck regulator
LM3103MH NSC 11+ SOPDIP 1MHz 0.75A buck regulator
LM95214CISDX NSC 10+ LLP Quad SMBus interface for the PowerWise ® series of remote diodes and local temperature sensors
LM95214CISD NSC 10+ 14-LLP-EP Quad SMBus interface for the PowerWise ® series of remote diodes and local temperature sensors
LM48411TLX NSC 10+ SMD Ultra-low EMI, filter-free, 2.5W, stereo, Class D and E2S audio power amplifier
LM3445M NSC 09+ MSOP10 TRIAC dimming offline LED driver
LM7301IM NSC 10+ SOT23-5 Low power consumption at 4 MHz GBW, rail-to-rail input and output operational amplifiers
LM7301IMX NSC 10+ SOT23-5 Low power consumption at 4 MHz GBW, rail-to-rail input and output operational amplifiers
LM7301IM5 NSC 11+ SOT23 Low power consumption at 4 MHz GBW, rail-to-rail input and output operational amplifiers
LM8261M5 NSC 10+ MSOP8 Rail-to-rail input with SOT23 - 5 high output current unlimited load op amp
LMV7239M5 NSC 08+ SOT23 45 nanosecond, ultra-low power, low voltage rail-to-rail input comparator
LMV7239M7 NSC 10+ SOT23-5 45 nanosecond, ultra-low power, low voltage rail-to-rail input comparator
LMV832MME NSC 09+ 8-MSOP Dual 3.3 MHz low-power CMOS EMI-hardened PowerWise ® series op amps
LMP7701MFX NSC 10+ SOT23-5 High precision CMOS input, rail-to-rail input, wide power range amplifier
LMP7702MAX NSC 10+ SOT23-5 Single, high precision, rail-to-rail output operational amplifier
LMP2011MFX NSC 11+ SOP-8 Single, high precision, rail-to-rail output operational amplifier

Categorical search