home page>Product Center> DAC digital-to-analog converter

Product images are for illustrative purposes only
Product details are welcome upon request

ADC122S101CIMMX

Category:DAC digital-to-analog converter
Product Name:12-bit micropower, RRO digital-to-analog converter
Manufacturers:NSC
Production Batch Number:10+
Encapsulation:MSOP-8
Stock Status:There is stock
Stock Quantity:7700
Minimum order quantity: 1
Details:

Product introduction

peculiarity

The DAC121S101Q's AEC-Q100 Class Qualified is a production automotive grade flow.
Guaranteed monotony
Low-power operation
Rail-to-rail voltage output
Power-on reset to zero volt output
Wide temperature range from -40 °C to +125 °C
Wide supply voltage range of +2.7 V to +5.5 V
Small package
Power-down function

illustrate

The DAC121S101 is a full-featured, general-purpose 12-bit voltage-output digital-to-analog converter (DAC) that can be powered from a single +2.7 V to 5.5 V supply and consume only 177 μA at 3.6 volts. THE ON-CHIP OUTPUT AMPLIFIER ALLOWS RAIL-TO-RAIL OUTPUT SWINGS AND 3-WIRE SERIAL INTERFACE CLOCKING FREQUENCIES UP TO 30 MEGAHERTZ OVER SPECIFIED SUPPLY VOLTAGE RANGES AND IS COMPATIBLE WITH STANDARD SPI, QSPI, MICROWIRE, AND DSP INTERFACES. Competing devices are limited to clock rates of 20 MHz and supply voltages are in the 2.7V to 3.6V range.

Use the supply voltage of the DAC121S101 as a reference voltage to provide as much output dynamic range as possible. Power-on reset circuitry ensures that the DAC output power is up to zero volts and persists until there is a valid write device. The power-down function reduces power consumption by less than one microwatt.

The low power consumption and small DAC121S101 package make it an excellent choice for battery-powered devices.

The DAC121S101 is the AD5320 drop-in replacement and the DAC7512 is a family of pin-compatible DACs that include the 8-bit DAC081S101 and the 10-bit DAC101S101. The DAC121S101 operates over a -40°C extended industrial temperature range of 105°C, while the DAC121S101Q exceeds the 1st grade automotive grade with a temperature range of -40°C to +125°C. The DAC121S101 is a 6-pin TSOT and 8-lead MSOP and the DAC121S101Q is only available on the 6-pin TSOT.

Main specifications

resolution	12 bits
DNL	0.25, -0.15 LSB (typical)
Output settling time	8 μs (typical)
Zero code errors	is 4 mV typical
Full-scale error	-0.06%FS (typical)
power consumption

Normal mode	0.64mW (3.6V) / 1.43mW (5.5V typical)
PWR power-down mode	0.14μW (3.6V)/0.39μW (5.5V typical)

apply

Battery-powered instrument
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuator
Car

andADC122S101CIMMXRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
ADC121S655CIMM	NSC	11+	MSOP-8	12-bit, 200 ksps at 500 ksps, differential input, micropower A/D converter
EPF10K20RC208-4	ALTERA	06+/07+	QFP208	IC FLEX 10K FPGA 20K 208-RQFP
EPF10K10QC208-3	ALTERA	06+/07+	QFP208	FPGA, FLEX 10K, 10K GATES, PQFP208; Logic IC family:FPGA; Logic IC Base Number:10; Logic IC function:EPF10K10; Voltage, supply:5.0V; Case style:PQFP;
AS3518	AUMS	10+	BGA
ADC121S655CIMMX	NSC	10+	MSOP-8	12-bit, 200 ksps at 500 ksps, differential input, micropower A/D converter
ADC124S101CIMM	NSC	10+	10MSOP	A/D conversion of the PowerWise ® series at 8 channels, 1 MSPS, 12-bit 500 ksps
XC4006E-4PQ160I	XILINX	2010+	QFP160	Field Programmable Gate Arrays (FPGAs)
ADC128S102CIMT	NSC	10+	TSSOP16	A/D conversion of the PowerWise ® series at 8 channels, 1 MSPS, 12-bit 500 ksps
EPF7192SQC160-7-15-10	ALTERA	2010+PBF	QFP160	Circular Connector; Body Material:Metal; No. of Contacts:4; Connector Shell Size:E; Connecting Termination:Solder; Circular Shell Style:Jam Nut Recept
EPF7192SQC160-15-10	ALTERA	2010+PBF	QFP160	Circular Connector; Body Material:Metal; No. of Contacts:4; Connector Shell Size:E; Connecting Termination:Solder; Circular Shell Style:Jam Nut Recept

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
DZ52-080Z300R024/OH	Hartmann-Lammle	23+	module	Hartmann-Lammle DZ52-080Z300R024/OH
1SVR040011R2500	ABB	2023+	converter	Universal signal converter 110-240VAC 50/60Hz / 100-300VDC
EA12-NO-20-1-31-BD	ROSS ENGINEERING	23+	Relays	EA12-NO-20-1-31-BD High Voltage Relay
EA12-DT-20-1-31-BD	ROSS ENGINEERING	2023+	module	High voltage relays
ABCIRHSE06HC2214PCWF80	AB	2023	connector	Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN	Alliance Memory Inc	23+	SOJ-36	AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE	ASAHI KEIKI	2023+	weld	Temperature sensor
V23154D735B110	TE	2023+	Relays	Low Signal Relay - PCB V23154D 735B110
V23154D735F104	TE	23+	Relays	Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20	SCHMERSAL	2023+	switch	Safety gate switch
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR	Honeywell	10+11+	SMD	RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors

NSC brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
ADC124S101CIMM	NSC	10+	10MSOP	A/D conversion of the PowerWise ® series at 8 channels, 1 MSPS, 12-bit 500 ksps
ADC128S102CIMT	NSC	10+	TSSOP16	A/D conversion of the PowerWise ® series at 8 channels, 1 MSPS, 12-bit 500 ksps
DS50PCI401SQE	NSC	10+	QFN52	2.5 Gbps/5.0 Gbps 4-lane PCI Express repeater with equalization and de-emphasis
DS50PCI401SQ	NSC	11+	LLP	2.5 Gbps/5.0 Gbps 4-lane PCI Express repeater with equalization and de-emphasis
LMH2190TM-38	NSC	10+	MICRO SMD	Quad 27 MHz clock trees drive the I2C interface
LMH2190TMX-38	NSC	10+	MICRO SMD	Quad 27 MHz clock trees drive the I2C interface
LMP8602MA	NSC	10+	TSSOP8	60V common-mode, fixed-gain, bidirectional accurate current-sense amplifier
LMP8602MMX	NSC	10+	SOP.8	60V common-mode, fixed-gain, bidirectional accurate current-sense amplifier
LMP8602MME	NSC	10+	8-MSOP	60V common-mode, fixed-gain, bidirectional accurate current-sense amplifier
LMP8602MM	NSC	10+	8-MSOP	60V common-mode, fixed-gain, bidirectional accurate current-sense amplifier
DP83936AVUL-33	NSC	07+	QFP-160	Systems-Oriented Network Interface Controller with Twisted Pair Interface(带双绞线接口的面向系统的网络接口控制器)
DP83936AVUL-25	NSC	07+	QFP-160	Systems-Oriented Network Interface Controller with Twisted Pair Interface(带双绞线接口的面向系统的网络接口控制器)
DP83936AVUL-20	NSC	07+	QFP-160	Systems-Oriented Network Interface Controller with Twisted Pair Interface(带双绞线接口的面向系统的网络接口控制器)
LMP8602MAX	NSC	11+	ACTORYPRESE	60V common-mode, fixed-gain, bidirectional accurate current-sense amplifier
LMP8601MA	NSC	09+	8-SOIC	60V common-mode bidirectional precision current sense amplifier
LMP8601MAX	NSC	11+	SOP-8	60V common-mode bidirectional precision current sense amplifier
LM48557TLX	NSC	09+	SMD	Mono, bridged load, with I2C volume control and reset ceramic speaker driver
LM48557TL	NSC	09+	SMD	Channel, bridge load, ceramic speaker driver with I2C volume control and reset
LM4666SDX	NSC	10+	QFN-14	1.5A fast response ultra-low dropout linear regulator
LM4853MMX	NSC	10+	MSOP-10	1.5A fast response ultra-low dropout linear regulator

ADC122S101CIMMX

andADC122S101CIMMXRelated ICs are:

Popular searches

NSC brand product recommendation

Categorical search

Related Links