ADC12V170CISQ

• Full power bandwidth of 1.1 GHz
• Internal sample-and-hold circuitry
• Internal precision 1.0V reference
• Single-ended or differential clocking mode
• Clock duty cycle stabilizer
• Dual +3.3 V and +1.8 V supplies operate
• Power-down mode and sleep mode
• Offset binary or two's complement output data format
• LVDS output
• Pin compatible: ADC14V155
• 48-Pin LLP Package (7x7x0.8mm, 0.5mm Pin Spacing)

illustrate

The ADC12V170 is a high-performance CMOS analog-to-digital converter with LVDS output. It is capable of converting large samples into 12-bit analog input signals at a speed of up to 170 per second (MSPS). Data is retained in a DDR (Dual Data Rate) format of the chip, which allows both sides of the output clock to be utilized while achieving a smaller package size. The converter uses differential, pipelined digital error correction and an on-chip sample-and-hold circuit to reduce power consumption and external component count architectures while providing excellent dynamic performance. A unique sample-and-hold stage yields a full power bandwidth of 1.1 GHz. The ADC12V170 operates from dual +3.3 V and +1.8 V supplies and consumes 781 mW at 170 MSPS.

The independent +1.8 V digital output interface power supply allows low-power operation with reduced noise. The power-down feature reduces power consumption by 15 milliwatts while still allowing fast wake-up times to be fully operational. In addition, there is a sleep function, which consumes 50 mW of power and has a fast wake-up time.

The differential input provides a fully differential input swing equal to 2x the reference voltage. A regulated 1.0V internal reference voltage is provided, or ADC12V170 can be operated with an external reference.

The clock mode (differential vs. single-ended) and output data format (complement of offset binary ratio 2) are pin-selectable. A duty cycle stability maintains performance over a wide range of duty cycles in an input clock.

The ADC12V170 is a pin-compatible ADC14V155. It is available in a 48-pin LLP package and operates over the -40°C industrial temperature range to +85°C

Focus on specifications

apply

• High IF sampling receiver
• Wireless base station receiver
• Power amplifier linearization
• Multi-carrier, multi-mode receiver
• Test and measurement equipment
• Communication instruments
• Radar system