ADC161S626CIMME

• 16-bit resolution with no loss of code
• Guaranteed performance from 50 to 250 kSPS
• Signal range accuracy± 0.003%
• Independent digital input/output power supply
• True differential input
• The external reference voltage range of +0.5 V is V one
• Zero power tracking mode 0 microsecond wake-up delay
• The wide input common-mode voltage range is 0V V A
• SPI™/ QSPI™ / MICROWIRE™ compatible serial interface
• The operating temperature range is -40°C to +85°C
• Available in a small MSOP-10 package

illustrate

ADC161S626 is a 16-bit successive approximation register (SAR) with an analog-to-digital converter (ADC) with a maximum sample rate of 250 ksps. ADC161S626 ± 0.003% lowest signal accuracy across the temperate range -40 ° C〜 to +85 ° C. The converter has a differential analog input with a good common-mode signal rejection ratio of 85 dB and ADC161S626 suitable for noisy environments.

ADC161S626 operates a single analog power supply (V A) and a separate digital input/output (V IO) supply. The range of five A can be from +4.5 V to +5.5 V and the range of V IO can be from +2.7 V to +5.5 V. This allows system designers to maximize performance and minimize power consumption while operating on the interface of a V+5+3.3 V controller in one V. Serial data output is a complement to binary 2 and is SPI™ compatible.

The ADC161S626's performance is guaranteed to be high temperature five with a clock rate of 5.5 or more at 1 MHz to 5 MHz and +2.5 V reference ADC161S626 is a small 10-pin MSOP package. High accuracy, differential input, low power consumption and small size enable ADC161S626 Ideal for direct connection to bridge sensors and sensors in battery-powered systems or remote data acquisition applications.

Key specifications:

apply

• Direct sensor interface
• I/O module
• Data acquisition
• Portable system
• Motor control
• Medical devices
• Instrumentation and control systems