ADC161S626CIMMX

• 16-bit resolution, no missing codes
• Performance is guaranteed from 50 to 250 kSPS
• Signal range± 0.003% accuracy
• Independent digital input/output power supply
• True differential input
• The external reference voltage range is 0.5 to V_{pander to}
• Zero power tracking has a 0 microsecond wake-up delay mode
• Wide input common-mode voltage range from 0V to V_{pander to}
• SERIAL INTERFACE COMPATIBLE WITH SPI™/QSPI/™ MICROWIRE ™
• The operating temperature is from -40 °C to +85 °C
• Small MSOP-10 package

illustrate

The ADC161S626 is a 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) with a maximum sampling rate of 250 kSPS. The ADC161S626 has a minimum signal of ± 0.003% across the temperate range accuracy -40℃ to +85°C The converter uses a differential analog input with an excellent common-mode signal rejection ratio of 85 dB, enabling the ADC161S626 to be used in noisy environments.

The ADC161S626 operates with a single analog supply (V_A）and a separate digital input/output (V_IO）of supply. _VA and range from 4.5 V to +5.5 V and V_IO'sThe range can be from 2.7 V to +5.5 V This allows system designers to maximize performance and reduce power consumption in ADC's V-controller_OneThe +5 of the +3.3 V analog interface of the operating part of the V, and to. The serial data output is complementary to binary 2 and is SPI™ compatible.

The ADC161S626 performance is guaranteed at a clock frequency of 5 MHz at 1 MHz and a +2.5 +5.5 V reference voltage with temperature five The ADC161S626 is available in a small 10-lead MSOP package. High accuracy, differential input, low power consumption and small size make it ADC161S626 Ideal for directly connected bridge sensors and sensors for battery-powered systems or remote data acquisition applications.

Focus on specifications

apply

• Direct sensor interface
• I/O modules
• Data acquisition
• Portable systems
• Motor control
• Medical devices
• Instrumentation and control systems