ADM3260基于
iCoupler®和
isoPower®芯片级变压器技术,是一款支持热插拔的数字和
Power Isolator,集成两路无闩锁、双向通信通道,提供完整的隔离式 I
2C接口和集成式隔离DC-DC转换器,支持最高150 mW隔离式电源转换。
iCoupler is a chip-scale transformer technology that outperforms optocouplers in terms of functionality, performance, size, and power consumption. Having a bidirectional I2C channel eliminates the need to separate the I2C signal into separate transmit and receive signals for use by independent optocouplers.
Based on Analog Devices' isoPower® technology, the on-chip isolated DC-DC converter provides isolated regulation voltages from 3.15 V to 5.25 V with a maximum output of 150 mW.
With ADM3260, iCoupler and isoPower channels and I2C transceivers can be integrated with semiconductor circuits to enable fully isolated I2C interfaces and power converters in a small package. ADM3260 is available in a 20-pin SSOP package and has an operating temperature range of -40 °C to +105 °C.
isoPower utilizes high-frequency switching elements to transmit power through its transformers. Particular care should be taken when designing printed circuit board (PCB) layouts and must comply with relevant radiation standards. For board layout suggestions, refer to Application Note AN-0971.
apply
-
I2C、SMBus或PMBus接口隔离
-
多级I2C接口
-
中央交换
-
电信与数据通信设备
-
-48 V分布式电源系统
-
-48 V电源模块
-
网络
-
磁盘阵列